How to Reset an Audi Gas Warning

You can reset all the warning lights using the same method.

Your Audi is equipped with a service warning light to notify you that there's something wrong with your car. The service warning light could indicate that there's a problem with the engine, or that you need to bring your car in to get serviced for oil. It will also display if you are running low on gas. When this occurs, the system warning lights sometimes need to be reset to get rid of them.

Instructions

1. Turn the key in the ignition to the "Off" position.

2. Press and hold the button on the left side of your instrument cluster display. Hold the button with one hand, while turning the key in the ignition switch to the "On" position. The system warning lights will display on the instrument cluster display. It could be the gas warning light or service oil light. These procedures work to reset whichever warning is displayed.

3. Pull out the button on the right side of the display until the warning disappears.

4. Turn the ignition switch to "Off" and push the right button. This is an alternative method.

5. Turn the ignition switch to "On" and pull the left button to clear the warning message.

References

• Gendan Automotive Products: Service Light Reset Procedures