How to Change the Timer on a Dryer

The timer is located on the dryer's control panel.

All dryers have a main knob, connected to a timer that controls all of the functions in the dryer. The timer knob has a dial that is turned to choose the dryer setting as well as set the length of time to run the dryer. Because the timer gets used for every cycle, the chances of it malfunctioning or breaking are very high. If the timer breaks, the dryer will not function until a new timer is installed.

Things You'll Need

• String
• Screwdriver

Instructions

1. Unplug the dryer from the wall prior to servicing.

2. Remove the timer knob from the timer. To remove it, insert a piece of string between the knob and the control panel. Pull up on both ends of the string to pull the knob off of the dryer.

3. Remove the screws on the rear of the control panel to remove the control panel rear cover.

4. Remove the mounting screws from inside of the control panel and remove the timer.

5. Transfer the wire connectors from the old timer to the new timer. To remove the wires, pull the connectors off of the terminals.

6. Install the new timer by aligning the mounting holes and then securing with the mounting screws.

7. Replace the rear panel of the control panel and secure it in place using the screws that were removed.

8. Push the timer knob onto the new timer post, and then restore power to the dryer to complete the installation.

References

• Repair Clinic: Dryer Timer Assembly Replacement