How to Program a Chamberlain Garage Remote for the Elite Series Logic 3.0

Save

Manufactured by the Chamberlain Group, the Liftmaster Elite series is a line of popular belt-drive, chain-drive and screw-drive garage door openers. Elite series garage door openers use Liftmaster's Logic 3.0 technology to provide tough, reliable residential and commercial garage door openers. Programming a remote control to your Chamberlain Liftmaster Elite series garage door opener is simple.

Things You'll Need

  • Chamberlain Liftmaster remote
  • Press and release the "Radio" button on the Logic 3.0 board; the adjacent light-emitting diode (LED) indicator will turn on.

  • Hold down the button on the remote control; if your remote has more than one button, press and hold the largest button. Release the button on the remote when the LED indicator begins flashing rapidly. After releasing the button, the LED indicator should glow solidly.

  • Press and release the "Radio" button again to complete the remote programming process.

Tips & Warnings

  • Repeat the process to program additional remotes to your Chamberlain garage door opener.
  • If your remote won't operate the automatic garage door after being programmed, replace the battery and repeat the programming process.

References

Promoted By Zergnet

Comments

Resources

You May Also Like

Related Searches

Read Article

19 Home Decor DIYs That Only Look Expensive

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!