You're carrying an armload of wooden kindling from your driveway to your backyard when a gust of wind swings your gate door closed. Because your gate is equipped with a bolt-style lock that can only be opened from the inside, you'll have to set down your kindling and reach over the top of the fence to re-open it. Avoid instances like this in the future by picking up a spool of thin rope or twine and following the steps below.
Things You'll Need
- Thin rope (or twine)
- Weighted metal ring
- Padlock (optional)
Locate the small hole at the top of the latch's pivoting hinge.
Thread the piece of thin rope or twine through the hole and tie a double knot to secure it to the hinge.
Cut the rope from the spool. The length of the rope should be sufficient to reach over the top of the gate, allowing it to be grabbed easily from the other side.
Tie the end of the rope to a weighted metal ring (a large key ring will suffice).
Place the string over the top of the gate. Pulling the string downward will lift the hinge and allow your gate to swing open freely.
Tips & Warnings
- You may wish to padlock the gate's latch for added security. Unlock it only when you know you'll be needing access in and out of the latched gate.
- Photo Credit latch image by Joann Cooper from Fotolia.com
- How to Make Rope
How to Build a BMX Stumpy Gate
Stumpy gates allow you to simulate a BMX starting gate with a simple design. A Stumpy gate features a metal bar that...
DIY Gate Closer
A gate left open can be annoying as well as dangerous to children, pets and garden plants. Visitors to Colonial Williamsburg in...
How to Open a Gate From the Outside Fence
Most garden gates are installed between vertical posts so the gate swings inwards. As the hinges can be installed to either post,...
How Do I Make a Latch for a Two-Door Gate?
A double gate provides excellent access for wider loads, such as lawn tractors and wheelbarrows. Most of the time, one gate will...