How to Make a Fort Out of a Wooden Pallet

Save

Wooden pallets are a good source of scrap lumber for creative projects like a child's fort. Many pallets are made of hardwood and are strong enough to support hundreds or even thousands of pounds. A pallet is a great starting point for a small tree fort to be set in your favorite tree. For little ones, choose a fruit tree with low spreading branches where the fort can be built a couple of feet above ground. Their imaginations will take over as the old pallet becomes a pirate ship, a frontier fort, a house or a school for the day.

Things You'll Need

  • Pallet
  • Pry bar
  • Hammer
  • Belt sander
  • Tape measure
  • Circular saw
  • Drill
  • Treated deck screws
  • Rope
  • Treated 2-by-4 lumber
  • Choose a heavy duty pallet with 3/4-inch thick slats, such as those used for cases of meat and other heavy items. Strip the slats from one side with a hammer and pry-bar, leaving the other intact for the platform.

  • Use a belt sander to sand down the faces and edges of the slats you removed and the top and edges of the platform face of the pallet. Add nails as needed to firm up the platform side. Cut one slat to fit along the open front edge of the platform and screw it to the ends of the 2-to-4-inch thick runners under the pallet.

  • Cut the removed slats in half and screw them around the edge of the pallet on three sides with three 1 5/8-inch treated deck screw in each board, leaving 3-inch gaps between each slat. Save three full-length pieces and screw them to the top edge of the cut slats for a rail. Check the railing for rough spots and belt sand as needed.

  • Find a tree with a trunk that spreads at least in three directions and has a wide enough area to set your pallet into. Add 2-by-4 treated lumber braces down to the ground to level the platform and tie ropes through the slats of the platform around the runners underneath and around the tree trunks to hold the pallet in place.

  • Build a ladder from well sanded 2-by-4. Cut the rails to fit from the ground to the platform and enough 12-inch wide pieces to make a step every 10 inches. Place the rails on edge and set the steps, wide face down, on top with the ends flush with the outside edges of the rails. Bore two 1/8-inch pilot holes in each end of each step and attach them with 3-inch treated deck screws.

Related Searches

References

  • Photo Credit dumpster and pallet image by Lucid_Exposure from Fotolia.com
Promoted By Zergnet

Comments

You May Also Like

  • How to Make Things from Wood Pallets

    Wooden pallets are the easiest way to get free wood. They are crude surfaces made of boards used for loading and unloading...

  • How to Build With Pallets

    If you are into reusing and recycling materials, you might be interested in building with shipping pallets. Building with pallets has recently...

  • How to Burn a Wood Pallet

    Dispose of old, broken or unwanted wood pallets by quickly burning them. Wood pallets are useful for transporting and holding large objects...

  • How to Build a Fort Out of a Wooden Pallet

    Wooden pallets are commonly used in many commercial warehouses and factories. These facilities are often looking to get rid of these pallets....

  • How to Build a Tree Fort

    A tree fort is a great project for kids or adults. Building one can teach kids about carpentry and other building skills,...

  • How to Make Farm Things Out of Wood Pallets

    Wooden pallets are a free or cheap resource for people to use for many projects around the home and farm. Pallets are...

  • DIY: Compost Bins Made out of Used Pallets

    Compost bins, also known as the environmentally friendly trash-can, can be built out of many different materials. Using your old wooden pallets...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!