How to Repair a Remington Typewriter

Save

The history of the Remington typewriter dates to the 1800s, which means your Remington could be more than 100 years old and in need of repairs. Typewriters have given way to computers as primary typing machines, but they are far from extinct. You can easily brush off your Remington and put it to use again. Though major repairs might require professional help, a thorough cleaning and a few adjustments at home can restore the typewriter.

Things You'll Need

  • Rag
  • Toothbrush
  • Cotton swabs
  • Aluminum polish
  • Knife
  • Eyedropper
  • Sewing machine oil
  • Nail polish remover
  • Pliers
  • Fill a bowl with water and a few drops of dish soap. Dip a rag into the solution, wring it out and wipe the typewriter with it. Dip a toothbrush or cotton swab into the solution and gently scrub hard-to-reach places. Sometimes a thorough cleaning helps lubricate the moving parts.

  • Rub the typewriter with aluminum polish to remove rust, which can cause moving parts to stick. If aluminum polish is not enough, scrub rust with superfine sandpaper or steel wool.

  • Clean between the segments, or slots, with a knife if keys are difficult to press. Scrape dirt up and out of the typewriter. With an eyedropper, drip a drop of typewriter or sewing machine oil between each segment to lubricate it for typing.

  • Mix a solution of one part nail polish remover and one part typewriter or sewing machine oil and drip it into the margin and tab key mechanisms. If this does not promote the actions, remove the mechanical stops from the margin bar -- located above the keys, in front of the type bar segments -- and soak them in nail polish remover or alcohol to eliminate dirt.

  • Check the geared type bar mechanism. This is above the type bar slots, linking the type bar and type lever in Remington typewriters. For the typewriter to function, the two should fit together like gears. Link the last tooth of each side together to ensure that they roll evenly.

  • Reposition type bars if they are bent. When type bars fail to return to position after pressing a key, the bar probably is bent. With pliers, hold the bottom of the bar. Gently bend the top part of the bar back and forth until it is straight.

Tips & Warnings

  • Avoid harsh products to clean your Remington because they might remove paint.

Related Searches

References

  • Photo Credit Jupiterimages/Photos.com/Getty Images
Promoted By Zergnet

Comments

Resources

You May Also Like

  • Brother Sewing Machine Information

    According to the Consumer Reports website, Brother International is one of the world’s largest sewing machine manufacturing companies. During the first decade...

  • How to Clean Old Manual Typewriter Keys

    As typewriters gradually go extinct, their value as antiques rises. Unfortunately, this usually means that old manual typewriters are dusty, rusty and...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!