How to Build a Hot Box for Seed Germination


You can get a good jump on the summer growing season when you start seeds in a hot box, sometime called a "hot bed." These devices are small growing areas that typically have a heat source and a glass or plastic cover. This protects tender seedlings from late winter and early spring frosts that would kill them if they were growing in an open, unprotected area. Hot boxes needn't be elaborate or expensive if you create one yourself with used or found materials.

Things You'll Need

  • Old window frame with glass
  • Bales of straw (optional)
  • Boards (2-by-2- inch or 2-by-4-inch)
  • Screws
  • Screwdriver
  • Hinges
  • Electric heating cable
  • Thermostat
  • Sand
  • Hardware cloth
  • Thermometer
  • Search for an old window sash containing unbroken glass. A typical size is 3-by-6-feet, which will serve well as the lid for your hot box. Also search for used boards if you want to save money.

  • Cut the boards of your hot box to have the following dimensions if you use a 3-by-6-feet window: rear wall, 18-inch-by-6-feet; front wall, 12-inch-by 6-feet; side walls 3-feet-by-12-inch, with the front edge measuring 12 inches and tapering to 18 inches tall at the rear edge.

  • Assemble your hot box by placing cut 2-by-2-inch boards at each inside corner and then screwing the front, rear and side walls to them.

  • Attach hinges to the rear edge of your window and the back wall of the hotbox to form a lid that you can easily open and close.

  • Locate your hot box in an area that receives full sun for as many hours each day as possible. You can also shield it from chilling winds by setting bales of straw around it as a windbreak but do not allow them to shade your hot box.

  • Lay an electric heating cable with a thermostat on the soil surface where you will situate your hot box. Then cover it with sand. Add a sheet of ½-inch mesh hardware cloth on top of the sand. Then add soil to fill the box about half full: this is where you will start your seeds.

  • Maintain a steady temperature of around 74 degrees Fahrenheit. Ventilate your hot box by opening the lid all the way or part way during the daytime when temperatures are above freezing. You can use a thermometer inside your hot box to tell you if you have opened the lid far enough to maintain a temperature in the 70s. Monitor the temperature several times during the day and then close the lid when the outside temperature begins to drop.

Tips & Warnings

  • Hot boxes help to germinate the seeds of tomato, pepper, melon and other types of plants that need warmth. Woody plants also benefit from the heat, which assists them in developing roots from cuttings.
  • Instead of an old window, you can use a double layer of clear polyethylene plastic.
  • Redwood and cedar are good types of wood for a hot bed.
  • If you purchase a heating cable with 10 to 12 watts per square foot, it should be adequate for most climate zones.
  • Water your seedlings inside the hot box early in the day, but after the outside temperature has risen to above freezing.
  • You must replace clear polyethylene plastic every year.
  • Do not use wood that has been treated with creosote.

Related Searches


  • Photo Credit Jupiterimages/BananaStock/Getty Images
Promoted By Zergnet


You May Also Like

  • How to Make a Hot Box for Gardening

    Creating a hot box for spring vegetables adds weeks to the growing season and provides a warm and sheltered location for growing...

  • How to Build The Cheapest Heated Seed Bed

    To get a huge jump on the spring planting for vegetables or flowers, you want to plant and germinate your seeds as...

  • How to Build a Seed Germinator

    If you want to give your garden plants a good head start, consider germinating them indoors. By germinating your seeds indoors, you...

  • Seed Box Preparation

    A seed box, or flat, provides space to grow multiple seedlings in a single container. These shallow boxes are typically between 3...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!