The flush valve, also called the fill valve, is the fixture that refills your toilet tank after a flush. These devices are connected by a hose from the bottom of the tank to your home's water supply. One-piece toilet flush valves have the float incorporated into the flush valve instead of a separate ball float and lever. This makes replacing a one-piece toilet flush valve relatively simple to replace for even the novice DIYer.
Things You'll Need
- Silicone grease
- Plumber's tape
Turn off the water supply for the toilet. Follow the hose from the tank to the wall where it meets the water supply valve. There should be a round or circular knob on the front of the water supply valve. Rotate this knob clockwise to turn off the water.
Remove the toilet lid. Flush the toilet to remove the water inside. Wipe up any excess with rags and sponges.
Place a towel on the ground underneath the tank. Unscrew the supply hose coupling from the underside of the tank with the pliers. Remove the plastic retaining ring above the coupling by unscrewing it.
Remove the toilet valve from the tank by pulling it straight up and out. Place a thin coat of silicone grease around the perimeter of the flush valve socket in the bottom of the tank. Insert the new one-piece flush valve into the tank and through the valve socket. Hold this with one hand.
Take the retaining nut in your other hand and thread it onto the bottom of the flush valve protruding through the bottom of the tank. Tighten this with the wrench.
Wrap the threads on the inlet valve with plumber's tape. Make at least two turns around the threads. Trim off any excess. Attach the supply hose coupling to the inlet. Tighten with the pliers.
Restore the water supply by turning the supply knob counterclockwise. Allow the toilet to fill. Flush and check that the flush valve is operating properly.
- Photo Credit toy toilet image by Wayne Abraham from Fotolia.com
How to Repair Toilet Flush Valves
When your toilet runs or doesn't flush properly, fix it by replacing the flapper or canister seal, adjusting the chain or replacing...
How to Replace a Toilet Diaphragm Flush Valve
Many toilets leak, and it turns out to be a problem in the mechanism that controls the flushing and filling of the...
How to Replace a Flush Valve on a Toilet
Toilets use either a flapper or a flush valve to flush and release the tank water to the bowl. Replacing a flush...
How to Remove a Flush Valve
A flush valve that has leaks or does not seal to the tank after flushing requires replacement. Unlike the fill valve, removing...
How to Change a Flush Valve on a Toilet
Worn flush valves cause toilets to leak water--gallons of it--creating noise and waste, and adding to your utility bill. Corrosion erodes a...
How to Repair an Eljer Flush Valve
A flush valve is the mechanism inside a toilet tank that allows water to flow from the tank to the bowl. Depending...