How to Repair Bathroom Taps


Your bathroom tap is a device that you don't pay much attention to, but is something that can cause you a lot of inconvenience once it malfunctions. The bathroom tap allows you to easily perform activities that keep you clean and hygienic. Repair a leaky bathroom tap as soon as possible to avoid more problems. Delaying your actions can mean more money out of your pocket. Learn to repair a leaky bathroom tap yourself and save time and money.

Things You'll Need

  • Screwdrivers
  • Rag
  • Adjustable wrench
  • Slip-joint pliers
  • Washer
  • Turn off hot and cold water supply at the valves under the sink, and open the faucet to relieve water pressure. Cover the drain with a piece of rag. Pry off or unscrew the plastic cap on top of the faucet handle, using a thin screwdriver or knife, and remove the top-mounted handle screw with a slotted screwdriver.

  • Lift off the faucet handle. This will expose the packing nut. The packing nut holds the faucet stem in place. Remove the packing nut with large pair of slip-joint pliers or adjustable wrench. Remove the valve stem; this has reverse threads, so unscrew it by turning it clockwise.

  • Remove the washer lat the end of the stem. The washer is held in place by a small screw; unscrew it with a screwdriver. Twist the screwdriver counterclockwise to remove the screw.

  • Fasten the new washer into the stem. The new washer must be identical to the old washer. Insert the stem into the faucet, and turn it counterclockwise to reinstall it. Put the packing nut back on, using a wrench.

  • Reinstall the handle and replace the plastic cap on top of the handle. Turn the water supply back on and check for leaks.

Related Searches


Promoted By Zergnet


You May Also Like

  • How to Repair a Bathroom Faucet

    If your bathroom faucet is running slowly, you may have a build-up of calcium and minerals inside the screen on the end...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!