How to Wire a Bathroom Extractor Fan


Bathroom extractor fans help control unwanted odors and excess humidity. Excess humidity can cause mold and other respiratory health issues. These fans are designed to change the air inside a bathroom at a specific rate. The air inside a bathroom should change approximately 8 times per hour. This is why these fans are sold based on how much air they can move within a given time.

Things You'll Need

  • Screwdriver
  • Wire strippers
  • Wire cutters
  • Plastic twist caps
  • Shut off the power to the bathroom circuit that will feed the extractor fan.

  • Open the fixture electrical box that will provide power to the fan. For a simple installation, locate the black and white feed wires inside the electrical box.

  • Remove the existing plastic twist caps on the existing splices. Do not separate the wires. At the fan unit, locate the black and white fan wires. Strip 1/2 of an inch of insulation off of these two wires if they are not factory stripped.

  • Connect the white wire of the fan to the white wire splice in the electrical box. Place a plastic twist cap on this splice. Connect the black wire of the fan unit to the black splice which contains the switch wire. The switch wire could be black or white depending on what color wire runs from the switch. If it is white, it should have been marked to indicate that in the electrical box. Place a plastic twist cap on this splice.

  • Close the electrical box, and turn the power back on. Test the fan for proper operation. The installation described is a simple installation. More complicated installations require knowledge of the manufacturer's installation instructions.

Related Searches


  • Photo Credit Hemera Technologies/ Images
Promoted By Zergnet


You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!