Bobbers date back to the World War II era. They came along before choppers and were simply modified stock motorcycles. Some of the modifications were removing fenders, blinkers, the windshield and anything else that was not necessary for the motorcycle to perform correctly. Smaller gas tanks, smaller headlights and springer front ends were also installed. Solo seats with springs for comfort were all the rage, as well. Choppers are basically extended versions of bobbers.
Things You'll Need
- Mechanic's tool set
- Motorcycle lift
- Solo seat with 3-inch springs (and mounting hardware for the Sportster 883)
- Bolt-on rigid hardtail or solid struts
- 2-inch under Springer front end (This is optional depending on the look you want)
- Drag handlebars or Ape hangers (if you choose Ape hangers you will need to purchase longer brake and clutch cables)
- Handlebar risers
- Side mount for license plate and brake light.
- 1 Smaller size mirror
Remove the turn signals. Follow the wires to their respective plug-ins and disconnect. Check with your state laws about turn signals on motorcycles.
If you plan to use a Springer front end you will need to place the motorcycle on a lift. Remove the front tire and brake assembly. Remove the headlight, handlebars and handlebar components. Remove the handlebar risers and the steering neck nut and triple-tree. The front end should slide right out of the frame, and you can then replace it with your Springer front end. Install the brake assembly and front tire.
Install your new risers, handlebars and smaller mirror, and assemble your components. (If you plan on using ape hangers you will have to purchase longer brake and clutch cables, as well as extend the wires for any electrical components attached to the handlebars.)
Remove the seat and install the new solo seat with properly fitted hardware. (If you are installing a rigid hardtail, skip this step until the hardtail is installed.)
Install hardtail struts in place of the stock suspension. If you are using a bolt-on hardtail instead of struts you must remove the rear tire, brake assembly, exhaust, fender, suspension, and swingarm. Bolt on the hardtail with provided hardware. Install rear tire, brake assembly and exhaust.
Remove the brake light and license plate mount from the rear fender while it is off the motorcycle. Modify your fender as desired or go with no fender. Install the fender without the brake light or license plate mount.
Install the side license plate mount with the tail light to the rear wheel axle. Use the existing wiring to connect the new brake light.
Tips & Warnings
- Some people change out the gas tank on bobbers to a smaller tank. Because the Sportster already has the smallest tank available, this step is not needed.
- Check local and state laws before any modifications are made to your turn signals and license plate placement.
- Photo Credit chopper image by thierry planche from Fotolia.com
How to Install Sportster Ape Hangers
Replacing your stock handlebars with custom ape hanger bars is a quick and easy way to add a custom look to your...
How Do I Convert Sportster 883 to 1200?
Transform your XXL Sportster 883cc into a lightning fast power-house with a 1200cc conversion kit. The 1200cc engine outshines little brother 883cc...
How to Modify Harley-Davidson Sportster Mufflers
The Harley-Davidson Sportster is the entry-level motorcycle for Harley-Davidson. Usually made with smaller engines, the Sportster is ideal for those learning and...
How to Jump Start Your Harley
Like car batteries, motorcycle batteries can need a charge from time to time when they are drained of power. You can jump...
How to Make My Sportster Into a Chopper
The Harley Davidson Sportster is a common chopper platform for several reasons. First, it has a simple motor and transmission configuration that...
The History of the Harley 883
When Harley-Davidson wanted to replace the Shovelhead engine it had been using in its big V-twin motorcycles since 1966, its answer was...
Harley 883 Performance Technical Tips
Harley-Davidson Sportster 883 models produce 40 horsepower in stock factory condition. Several incremental modifications can be made to double the stock horsepower....
Sportster 883 Specifications
The Harley-Davidson 883 Sportster model follows in a long line of Sportsters manufactured by the American company since 1957. The 883 is...
1989 Harley Davidson Sportster 1200 Specifications
The 1989 Harley-Davidson XLH Sportster is a cruiser motorcycle. In addition to the 1200 model, the bike was available in two other...