How to Replace the Camshaft Position Sensor on a 2001 Chevrolet Tracker


Chevrolet equipped the 2001 model-year Tracker with a camshaft-position (CMP) sensor which detects the position of the camshaft and synchronizes the fuel-injection system. The sensor reads a reluctor wheel on the camshaft to determine the shaft's position and speed. Since the CMP sensor inputs data for engine timing, a malfunctioning sensor's symptoms are similar to those of other timing issues which include rough idling, stalling, hesitation and weak acceleration. The CMP sensor is relatively inexpensive and can be replaced with basic hand tools.

Things You'll Need

  • Flat-tip screwdriver
  • Philips screwdriver
  • O-ring
  • Engine oil
  • Pound-feet torque wrench
  • Locate the camshaft-position (CMP) sensor on the rear of the cylinder head on the driver's side. The sensor's housing is round, has a single electrical connector plugged into it and has a flange with a slotted bolt-hole.

  • Scribe the cylinder head with a flat-tip screwdriver to mark the position of the slotted flange. Unplug the connector from the sensor housing.

  • Remove the bolt from the flange with a Philips screwdriver. Remove the camshaft-position sensor.

  • Install the new O-ring onto the new CMP sensor. Coat the O-ring lightly with clean engine oil.

  • Align the coupling on the end of the sensor with the slot in the end of the camshaft. Insert the sensor into the cylinder head.

  • Reinstall the sensor housing's mounting bolt into the slotted flange but leave it somewhat loose so the flange can be rotated. Align the flange with the scribe mark on the cylinder head, then tighten the bolt to 11 pound-feet.

  • Reconnect the electrical connector to the CMP sensor's housing.

Related Searches


  • GM Service and Parts Operations Publication"; Document ID#685689, 2001 Chevrolet/Geo Tracker(2WD), Camshaft Position (CMP) Sensor Replacement; General Motors Corporation; 2004
Promoted By Zergnet



You May Also Like

Related Searches

Check It Out

How To Travel For Free With Reward Points

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!