How to Set an Invicta Lupah Watch

Setting a watch is easy.
Setting a watch is easy. (Image: Watch image by Corneliu C from

The Invicta watch company, founded in 1837, has been focused for nearly 200 years on providing reasonably-priced Swiss watches to the general population. Invicta creates watches with both style and function as the focal point and maintains a large market share. Setting a Lupah watch from Invicta can be confusing, but becomes easy once you are familiar with the watch.

Hold the watch case in your left hand.

Locate the crown on the right side of the case. There will be a button on the upper and lower right, and the crown at the 3 o'clock marker.

Pull on the crown until it clicks a single time. If the date of the watch is incorrect, rotate the crown clockwise to change the date (one day at a time). When the date is correct, pull on the crown until it clicks again.

Rotate the crown clockwise to adjust the time until it is properly set. To set the seconds hand, set the watch slightly ahead of the reference time you are using, and wait until the second hand matches the real time before you activate the watch.

Push in the crown one click to start the hour, minute and seconds hands, and push it in a second click to close the crown. The watch is now set and sealed.

Tips & Warnings

  • The buttons on the side of the Lupah watch are for the chronograph timing function.

Related Searches


Promoted By Zergnet


You May Also Like

Related Searches

Check It Out

This Is the Beauty Routine of an Ex-Pat in China

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!