How to Program the Keyless Entry for a Ford Expedition

Save

Ford’s keyless entry system on the Ford Expedition allows for entry to the vehicle without keys. The system has a five digit master code for entry via the keypad, which you cannot change; however, the system does allow for you to input a customer, personal code. Many people do this for ease of remembrance. Once you program the personal code into the system, you can unlock the Expedition with either the factory code or the personal one.

Things You'll Need

  • Factory code
  • Enter the five digit factory code into the keypad, located on the driver door.

  • Press the “1 * 2” button within five seconds of completing step one.

  • Enter your own personal code, making sure to enter the five digits quickly. If the system acknowledges your new code, the locks on the Expedition will cycle once. If the locks do not cycle, repeat steps one through three.

Tips & Warnings

  • You can erase the personal code by entering the factory code and then hitting the “1 * 2” button.
  • Ford Motor Company recommends you not choose a code that is five numbers in sequence or five of the same number; thieves easily figure these out.

References

Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

How To Travel For Free With Reward Points

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!