How to Maintain a Cross Fountain Pen

Save

Cross brand fountain pens are pens you keep for a lifetime, even passing them down to the next generation. They are cherished items, and attention to their upkeep is important. Not carefully handling and maintaining a Cross fountain pen could mean a relatively expensive bill from Cross, should you send it in for repair when it is not under warranty. While its upkeep is not too difficult, attention to certain basic details is a must.

Things You'll Need

  • Fountain pen ink
  • Glass container
  • Dishwashing liquid
  • Grit paper
  • Jeweler’s rough polishing cloth
  • Use only fountain pen ink. Do not use India ink, which contains damaging shellac, and do not use drafting ink or technical ink. Some Cross fountain pens use a converter that allows the use of bottled ink rather than regular fountain pen ink. Follow the instructions provided with the pen or visit the Cross website to learn how to handle the converter.

  • Cap the pen with its fitted cap, or another protective covering if it does not have its own cap, when not in use. Do not unnecessarily cap and recap the pen, since it is subject to wear and an eventual loose fit.

  • Do not store the fountain pen in any position but upright, that is, nib or point up. Do not subject the exterior finish of the pen to anything that would tarnish it.

  • Do not bend the clip beyond how it is designed to function: a tightly sprung clip. Do not subject the nib to any force beyond the force exerted on it for use in writing on paper.

  • Soak the nib and front section of your Cross fountain pen overnight in a glass container, large enough to hold the parts, in lukewarm water that has a couple of drops of dishwashing liquid mixed into it to remove ink clogs in the feeder system. Clean the parts thoroughly the next day.

  • Empty the fountain pen of ink if you are not going to use it for more than a few days. Thoroughly clean the fountain pen with room temperature plain water before storing the pen for an extended length of time.

  • Use rough paper to remove wear marks and small scratches on solid brass and aluminum pen caps and barrels. Use grit paper that has a grade between 600 and 2500 for nib polishing.

  • Use a fine polishing paste to polish most pen exteriors except plated finishes. Use a jeweler’s rough polishing cloth to polish a metal finish, or most any finish for that matter.

  • Use a plain polishing cloth for polishing pen exteriors, as the first step in a two-step polish. Use a soft polishing cloth for polishing pen exteriors, as the second step.

References

Promoted By Zergnet

Comments

You May Also Like

  • How to Maintain a Fountain

    To keep a water fountain running properly and looking beautiful season after season, it's important to give it the care and attention...

  • How to Write With a Fountain Pen

    The fountain pen was invented by Lewis Waterman in 1884 as a more viable alternative to the traditional dip pens of the...

  • How to Clean a Fountain Pen Nib

    Although, rarely used today, the fountain pen is an elegant and costly instrument used for writing. The fountain pen has a reservoir...

  • How to Repair a Waterman Fountain Pen

    The legend is that L.E. Waterman invented the first practical fountain pen feed design in 1884 following a disastrous contract signing involving...

  • How to Clean a Fountain Pen

    The pleasure you take in writing with a fountain pen can diminish considerably if you don't maintain the pen in good working...

  • How do I Date a Cross Pen?

    A.T.Cross has been a Rhode Island maker of pencils and pens since 1858, but made stylographic pens, not fountain pens, for the...

  • How to Flush a Fountain Pen

    Fountain pens should be stored in an upright position, with the nib of the pen pointing upward. Failure to store your pen...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!