How to Make a Stand for a Dress Form
Making a dress form to mimic your exact body measurements can be done with duct tape, packing tape or papier mâché. DIY dress forms are easy to set on a stand in the same manner as a store-bought dress form. Working with your dress form on a stand allows you to have a realistic view of how your creations will look when you wear them. Stands can be simple and utilitarian or creative. They are easy to make and to install in your DIY dress form. Does this Spark an idea?
Other People Are Reading
Things You'll Need
- Tree stand or umbrella stand
- Spray paint made for covering plastic
- PVC pipe (5 feet of 1 1/4-inch pipe)
- Pencil
- String
- Batting
- Hack saw
- Duct tape
- Thumb screw or screwdriver
- Filling
Instructions
-
-
1
Place the PVC pipe in the base of the tree or umbrella stand. Twist the thumb screws on the stand. If the stand uses standard screws perform this step with a screw driver.
-
2
Pencil mark the PVC pipe at your bust line.
-
-
3
Remove PVC pipe and cut along your marking with a hack saw.
-
4
Place PVC pipe back in tree or umbrella stand.
-
5
Spray paint entire base. Allow to dry then add a second coat.
-
6
Place batting around the top of your dress form to protect the PVC from damaging your DIY dress form. Tie string around batting.
-
7
Insert stand into dress form. Stuff additional batting, newspaper or other stuffing material to ensure that the stand stays firmly in place. Once upright, add additional duct tape to the bottom of the dress form to hold the stuffing in.
-
1
Tips & Warnings
Umbrella stands are preferred if your dress form is decorative.
Spray paint is optional, but adds a nice decorative touch.
