How to Connect an Electric Dryer
Electric dryers aren't as efficient as gas dryers. However, they are much simpler to install. A gas dryer is normally installed by a professional; you can install and connect your electric dryer, even if you're inexperienced. You'll need to properly connect the dryer cord; electric dryers do not come with cords attached, because homes often have different plug types. Does this Spark an idea?
Instructions
-
-
1
Attach the power cord to your dryer. Remove the service panel from the rear to access the dryer cord terminals. Loosen the screws on the individual cord terminals. Attach the dryer cord connections and tighten the screws to secure the cord. The center cord connects to the center terminal for three-prong cords; if your dryer plug has four connections, connect the white (neutral) connection to the center terminal, and attach the green (ground) connection to the ground terminal, located above the other terminals.
-
2
Replace the service panel and position your dryer in place, but leave a few feet of clearance to install the dryer vent connection. Make sure the floor is dry before placing the dryer in position.
-
-
3
Attach one end of the dryer vent connection to the exhaust port on the rear of your dryer. If you have a clamp, tighten it to secure the vent connection in place.
-
4
Attach the other end of the dryer vent connection to the wall vent outlet. Plug the power cord into the wall outlet and move the dryer into its operating position.
-
1
Tips & Warnings
Most dryers have either a 3- or 4-inch exhaust port. Check your exhaust port's size before purchasing a dryer vent connection. Do not use a 3-inch connection on a 4-inch port, or vice versa.
Check your plug before buying a dryer cord. Newer homes have four-prong dryer cords; older homes usually have three-prong cords, unless they've been updated.
Do not plug in the dryer cord until it is properly connected and grounded by the dryer terminal.
