How to Repair a Leaning Wooden Deck

Save

A leaning wooden deck is often more than an eyesore. It can also be a safety hazard. It is best to repair the problem as soon as possible to prevent any accidents or further damage to the deck. First, it is important to understand what is causing the deck to lean. Fixing the source of the problem will help make sure that it does not return.

Things You'll Need

  • Jack
  • Level
  • Reciprocating saw
  • Treated lumber
  • Concrete
  • Weather-resistant screws or nails
  • Screwdriver
  • Hammer
  • Locate the problem. Inspect the structure of the deck to see what is causing it to lean. It could be broken post or beam or it could be a sinking foundation. Make sure that the rest of the deck structure is sound before attempting a repair. If the deck is badly damaged, consider replacing it, or having it replaced, instead.

  • Level the deck. Use a jack to raise the low parts of the deck so that it is level. Add temporary supports to hold the deck in place while you work. These can be made by attaching 2x4s between the deck beams and posts driven in the ground. Be sure the posts will not sink under the weight of the deck, and that the supports will not interfere with your repair work.

  • Repair the foundation, if necessary. If the leaning deck is caused by a sinking foundation, be sure the soil underneath is well-compacted to prevent future settling. Add fill dirt or pour concrete piers if necessary to build a strong foundation.

  • Remove any damaged lumber. A reciprocating saw is useful for cutting away the old boards.

  • Replace the wood you removed with similar but new lumber. Check to see that the deck is "even" by using your level, and securely attach the new boards using weather-resistant screws or nails.

  • Remove the temporary supports. As the supports are removed, be sure that the repairs are able to hold the weight of the deck.

Tips & Warnings

  • Special pre-cast concrete blocks are available at home-supply stores and can serve as a foundation.
  • Check with local building codes and regulations before beginning repairs.
  • Always be sure the deck is well-supported, especially if you will be working underneath.
  • Use caution when operating power tools.

References

  • "Outdoor Projects 1-2-3;" Meridith Publishing Group; 1998
Promoted By Zergnet

Comments

You May Also Like

  • How to Repair Deck Steps

    Deck stairs come in two basic types. In one, the stringers--the two diagonal side supports--are cut in a sawtooth shape to provide...

  • How to Clean a Deck

    A clean deck - besides being a more inviting place for your barbecue - will probably last longer because cleaning helps kill...

  • How to Fix a Leak in the Bathroom Sink

    When you open up the cabinet under your bathroom sink and see water, chances are good that you have a leak. Part...

  • How to Repair Sinking Concrete Steps

    Concrete steps that have begun to sink pose a problem when it comes to repair. The reason the steps are sinking is...

  • How to Fix a Leaning Pergola

    Pergolas are relatively easy to build in a backyard, but sometimes the ground can move or the foundation of the pergola is...

  • How to Sand My Deck Before Cleaning

    Before you can stain your deck, you must sand and clean the surface. Any sanding tools would work, from power sanders to...

  • Homemade Deck Cleaning Solution

    As a deck ages, the wood collects tannin stains from leaves and twigs and general grime from the environment at large. As...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!