How to Fix a Leaky Oil Filter


You should change the oil filter on a vehicle every time the oil is changed. Changing the oil and filter regularly is one of the cheapest and most effective ways to prolong the life of an engine.

Occasionally an oil filter will leak after installation. A seal should form between the bottom of the oil filter and the flat plate around the oil coupler fitting. Oil in an engine is under pressure, and an inadequate seal will leak.

Things You'll Need

  • Paper towels or shop rag
  • Spray degreaser
  • Putty knife
  • Fresh oil
  • Verify that you have installed the correct oil filter. Check the numbers on the filter against the information provided by your vehicle's manufacturer.

    Oil filters are matched to a specific engine, not a specific model of car. Many models of car are available with multiple engine types, each requiring its own oil filter.

  • Verify that the filter is still tight. An oil filter should never be tightened beyond "hand tight", but a filter may sometimes become loose after it is installed. Re-tighten the filter and check for leaks.

  • Remove the filter and verify that it has not been cross-threaded upon installation. The metal of the filter is softer than the fitting on the vehicle, so only the filter threads would be damaged if the filter was cross-threaded.

    If the threads on the filter are damaged you will need to replace the filter.

  • Verify that the rubber seal is installed on the bottom of the filter, and is not damaged. Replace any filters with damaged or missing rubber seals.

  • Verify that the area where the seal mounts to the engine block is free of dirt, debris, or any parts of an old seal. Scrap away any dirt with a small putty knife. A small amount of a degreaser may help remove stubborn grime.

    Clean the threads on the oil filter fitting.

  • Use your finger to smear a small amount of oil on the rubber seal on the bottom of the oil filter.

  • Reinstall the filter and hand tighten.

    If the filter still leaks, replace it and install a new one.

    Check the oil level and refill as needed.

Tips & Warnings

  • Problems with oil filters are almost always with the seal, but occasionally one may leak at a seam in the housing. Replace as needed.

Related Searches


Promoted By Zergnet


You May Also Like

  • How to Find an Oil Leak on a Car

    Ever notice a puddle of oil under your car and wonder how to figure out where it is coming from, and what...

  • How to Repair Engine Oil Leak

    A lot of engine oil leaks can be stopped without the need of a skilled mechanic. 5 to 30 minutes of your...

  • How to Seal an Oil Pan Leak

    The price of oil has been steadily increasing over the past few years. Oil leaks are not cost-effective, and can do damage...

  • How to Seal an Oil Leak

    Engine oil lubricates the engine's internal moving parts, helps remove and control heat, and increases the life of the engine. Engine oil...

  • How to Fix an Oil Leak on a Kia Sportage

    Fixing an oil leak on a Kia Sportage can be an extremely difficult job or a fairly easy one, depending on where...

  • How to Repair a Leaking Oil Tank Filter

    Your oil-burning furnace is a basic system consisting of a tank, supply pipes, a burner and a series of heat distribution ducts....

  • How to Fix a Leaking Oil Tank

    An oil tank leak, if not detected and left untreated, can become a costly problem. The leak can be fixed by welding...

  • Bad Oil Filter Symptoms

    When an oil filter goes bad, you may not have any clue at all. Oil filters are designed with a safety feature...

Related Searches

Check It Out

How To Travel For Free With Reward Points

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!