How to Secure a Window With a Broken Lock

Save

Windows are a very common point of entry for burglars since they count on homeowners being careless about the upkeep of the locks, or even remembering to lock them at all. When you have a window with a broken lock, it may not be reasonable to replace the broken lock or the whole window. You can still remain protected by a few do-it-yourself methods that will allow you to breathe a little easier.

Things You'll Need

  • Wooden dowel
  • Long screws
  • Chain lock
  • Sheet metal screws

Sliding Windows

  • Measure the length of the exposed track when the window is completely shut.

  • Cut a 2 inch wooden dowel to match your measurement (you may need to take an inch or so off to be able to remove it once it is in place).

  • Insert the dowel into the exposed end of the track. Make sure it is all the way in and cannot be jarred out by jerking the window open. Having the dowel in place will not allow the window to slide open.

  • Open the window as far as you can.

  • Insert several sheet metal screws in 6 to 8 inch intervals along the top of the exposed track.

  • Adjust them as necessary to allow the window to slide below them without catching. Their presence will keep the window from being "jumped off the track" by a burgler.

Casement Windows

  • Obtain a chain lock (such as the kind used on doors).

  • Attach one side to the sash of the window and the other to the casement using the longest screws possible for both.

  • Shorten the chain as much as you are able to while still being able to comfortably lock it.

Tips & Warnings

  • While locking up is extremely important, secondary precautions, such as alarm systems and motion sensor lights are also very helpful in securing your windows.

References

Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!