How to Remove Ceramic Tiles Intact

Save

If you've got a ceramic tile wall or floor, and you want to salvage some or all of the tiles intact, the first thing you need to know going in is that it might not be possible. Tiles are installed to stay put forever, and tile removal normally entails breaking them out. If it's just a matter of wanting to salvage plain old ceramic tiles for re-use, buying new ones is almost always a better option. But if the area contains tiles that you consider special enough to merit the work to save them, work slowly and patiently, never forcing the tile.

Things You'll Need

  • Grout saw (it looks like a toothbrush handle with a razor blade on it)
  • Hand-held vacuum
  • Hard metal putty knife
  • Small hammer
  • Dig out the grout with your grout saw on all sides of the tile that you want to remove. Work with the saw in small sections of grout, scratching off the surface first and then digging down into it. Vacuum up the crumbled grout as you go so you can see into the bottom of the line. Continue digging until you've exposed the line where the tile meets the underlayment.

  • Work your putty knife into the line where the tile meets the underlayment. Move all along the length of it on one side, gradually working the knife under the mortar; then do the other sides. Don't force the tile or try to pry it out; work it little by little until enough of the mortar is loose that the tile pops out.

  • If working with the putty knife by hand doesn't get the tile out, hold the blade edge flat against the line where the tile meets the underlayment and very gently tap the back of the knife multiple times with your hammer. If the tile doesn't respond on four or five taps, reposition the knife and try again until it does.

Tips & Warnings

  • Wear goggles to protect your eyes from flying grout chips.

References

Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!