How to Compact Fill Dirt for Building

Save

Compacting fill dirt for proper building will save you costly headaches down the road. An improperly compacted fill will cause the building to settle, leading to flooring cracks and possible structural damage that you, as the builder, will be responsible for repairing. The process to appropriately compact fill dirt for building includes a record-keeping step to protect you in the event of building issues in the future.

Things You'll Need

  • Water
  • Hose
  • Rake
  • String line
  • Shovel
  • Fill dirt
  • Tamp (hand or machine)
  • Compaction tester

Dampen the surface of the fill dirt you wish to compact. Don't over saturate it to the point where pools of water form or it becomes muddy. The surface should have a uniform dark color, and wind should not be able to raise a cloud of dust from the area.

Set up string line 8 inches above the grade you want your dirt to be at. Make sure the string is level. Place it every 8 feet so you can see how uniformly level the surface of your fill dirt is. Fill in any obvious low points with a few shovels of extra fill. When satisfied, take the string line down.

Tamp the soil, using a hand tamp or machine tamp, working back and forth in a grid pattern. Tamp the fill dirt for at least 20 minutes. Then put the string line back up and eyeball the fill dirt to make sure it is still level. Add more dirt if needed and tamp again.

Test the soil with the compaction-testing machine. Contact your local zoning board to learn what range of results is acceptable for fill dirt on your site. If you fail the compaction test, dampen the earth again, re-tamp and re-test.

Related Searches

Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!