How to Cut a Granite Sink

Stock Xchange

Granite provides a durable and beautiful counter surface, but making any changes to it usually requires expensive, professional help. But it doesn't always have to be that way. If you want to add a sink to your countertop, all you need is a side grinder and a little patience, and you can cut a granite sink yourself.

Things You'll Need

• Side grinder
• Tile blade for grinder
• Shop-Vac
• Sharpie
• Sink template

Instructions

1. Remove the sink template from the box. Using scissors, cut out the sink template. Place the template on the countertop in the desired area, making sure that it is square to the backsplash and has a minimum of three inches from the wall. Secure it in place with a few small pieces of tape and mark along the edge of the template with a Sharpie. Remove the template.

2. Using the grinder, follow the template lines to cut out the sinkhole. Have a helper hold the Shop-Vac hose behind the grinder blade to catch as much dust and debris as possible. Leave the four corners intact for now.

3. Once the template outline has been cut, have your helper support the cutout from under the sink and finish cutting the corners. This way the cut out won't snap under its own weight after you cut the second corner.

4. Clean up and install your new sink.

Tips & Warnings

• Cover adjacent surfaces with plastic or old sheets to make cleanup easier.

• Always wear safety goggles when operating power tools.