How to Replace Rollers on Sliding Glass Doors


Sliding glass doors have one stationary door and one that slides. Rollers are located on the bottom of the sliding door, which gives it the ability to slide. Replacing the rollers on the sliding glass door is not hard, but takes more than one person and at least an hour of your time. It is better to replace the rollers yourself if you feel you can do it, since hiring a professional will cost you more than $100.

Things You'll Need

  • Screwdriver Screws Rollers
  • Remove the stationary door first. (Most sliding doors can only be removed from the outside, which will require you to remove the stationary door first.) Unscrew the screws that hold in the stationary door. Use a screwdriver to push up from the bottom of the stationary door as you have another person hold it from the outside and pull out.

  • Move the wheels up into the sliding door. They can easily be pushed upward into the bottom frame of the sliding glass door. This will give you enough room to lift the door and pull outward.

  • Remove the screws on the sliding door. There are two pairs of screws on each side of the bottom of the sliding door. Unscrew the screws, which will also allow you to remove the bottom part of the frame to the glass door.

  • Place the new rollers inside the bottom of the frame. Screw both the bottom part of the frame and the rollers back into place. Replace the sliding door by lifting the rollers into the bottom of the frame, putting the bottom of the sliding door into the track, and fitting the top into the track as well. Replace the stationary door by putting in the bottom first and re-screwing the screws to keep it stabilized.

Tips & Warnings

  • Working with glass doors takes at least two people. Never try to do it on your own, or you will risk injury and breaking the glass.

Related Searches

Promoted By Zergnet



You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!