Make Your Own Indoor Water Fountain

Save

Creating an indoor water fountain is a project you can complete in less than an hour, as long as you have your materials handy. Water fountains add ambiance to a room while enhancing a soothing atmosphere with the soft gurgle and flow of water.

Things You'll Need

  • Large ceramic flower pot Medium ceramic flower pot Water fountain pump Colorful glass stones Half of a brick Plumbers putty Waterproof adhesive

How to Make Your Own Indoor Water Fountain

  • Select two ceramic flower pots that best fit the décor of the room where you are placing your indoor water fountain. You will need two sizes: one large enough to house the pump, brick, and decorative stones; and a smaller one for the top of the fountain. Your local home improvement store should have a variety of pots to choose from, or you can visit a pottery warehouse for a huge selection. Hobby stores and home décor venues also carry ceramic flower pots, as do discount stores. The stones for this project can be anything that suits the ceramic pots. Colorful glass or tumbled river rock work beautifully.

  • Place the pump into the large ceramic pot and feed the electrical cord through the opening in the base of the pot. Fill in around the cord with plumbers putty, making sure the ceramic pot is watertight. Alternatively, you can run the cord up the side of the pot and over the top, but you will likely want to add a plant to your indoor water fountain to hide it from view. Attach the plastic tubing to the pump.

  • Stand the half brick on end in the center of the large ceramic pot. Waterproof adhesive will work to secure the brick to the bottom of the pot. This is the stand for your top ceramic pot, so if a half brick is not tall enough, build your stand with two or three bricks until you reach the desired height.

  • Feed the plastic tubing through the opening in the base of the small ceramic pot. Secure the opening with plumbers putty to make the top of your indoor fountain watertight.

  • Create a mountain of colorful stones or river rock around the tubing, until only the opening at the top of the plastic tubing is visible. Waterproof adhesive, such as Liquid Nails, works great for keeping the rocks together. You may only need to secure the ones on the outside perimeter of your rock mountain.

  • Fill in the large ceramic pot with rocks or glass stones until the pump and brick mechanisms are covered. Fill both pots with water before you turn on the pump.

Tips & Warnings

  • Bamboo stalks make a lovely addition to your indoor water fountain.
  • Let your adhesive dry before adding water to your fountain.

Related Searches

  • Photo Credit http://www.morguefile.com/archive/display/187471
Promoted By Zergnet

Comments

Resources

You May Also Like

  • How to Build an Indoor Water Fountain

    Indoor water fountains provide many wonderful benefits. They are relaxing to hear and mesmerizing to watch. There is something about the sight...

  • How to Make Small Indoor Water Fountains

    An indoor fountain adds a soothing presence to any room and you can make one yourself easily and in a short time....

  • How to Build Your Own Fountain

    Water fountains are easy to create, and add a soothing feature inside a home or in an outdoor landscape. You can purchase...

  • How to Make Your Own Garden Fountain

    When you think of back-yard fountains, perhaps you picture elaborate concrete statues spitting water. You also may believe installing a fountain is...

  • DIY Indoor Water Feature

    You can design and make your own indoor water feature with acrylic sheeting and a large planter. Make a water-wall room divider...

Related Searches

Check It Out

DIY Wood Transfer Christmas Ornaments

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!