How to Repair an iRobot Vacuum

The iRobot vacuum has become wildly popular as a time-saver without parallel in the housecleaning realm. However, it sometimes breaks down. This article will guide you in repairing your iRobot.

Instructions

Instructions for Repairing an iRobot Vacuum

1. Always check to see if the base is plugged in. Check the contacts located underneath your iRobot to see if the sensors are blocked.

2. Clear the wheels of any string or impediment that could be wrapped around the wheels. Make sure they spin freely, and blow out all of the crevices with compressed air.

3. Check your owner's manual if the iRobot starts beeping. There will be a chart that explains what each number of beeps means, and provides tips for correcting each problem.

4. Look underneath the iRobot if it suddenly behaves erratically. You may need to clear debris from under the front of your vacuum so it can operate properly.

5. Move your iRobot if it gets stuck behind a piece of furniture or cornered between the wall and a plant. Consider moving such impediments out of the way if they are continually causing a problem.

Tips & Warnings

• Check the online resources listed below for more solutions, as iRobot owners post new problems, questions and answers.

• Tampering too much with an iRobot can void its warranty, so proceed with care.

Resources

• Roomba and iRobot Forum
• iRobot Forum