How to Install a Standing Seam Metal Roof
Standing seam metal roofing was once used solely for industrial use in the extreme climates of New England and the Deep South. Recently, it has become an architectural statement that has become popular for many roofing needs. Properly installed, a metal roof is virtually maintenance free, fire resistant, and often able to last for the life of the structure upon which it rests. Metal roofing panels are now available in a wide range of colors and styles. Installation of a standing seam metal roof involves joining vertical interlocking panels from the top of the roof (ridge) to the roof’s eave (edge). The area where each panel joins the next is raised above the roof’s flat surface. This allows water to safely run off without leaking into and between the panels.For the DIY-er, standing seam shingles can be custom ordered and will arrive prepackaged with complete instructions. Metal panels can be secured with hidden fasteners that are hidden by the next connecting panel, or (less expensive) by using exposed fasteners that are driven through each metal panel into the roof. Does this Spark an idea?
Other People Are Reading
Things You'll Need
- Roofing paper
- A supply of standing seam metal roofing panels (each precut to 3 to 5 feet in length)
- Construction gloves
- Ladder
- Metal roofing panel fasteners
- Basic hand tools (differ according to the manufacturer)
- Metal crimping tool
- Exterior paint of your choice
Instructions
-
Install a Standing Seam Metal Roof
-
1
Apply roofing paper over the roof sheathing, then over each roof “valley” (the valley is where 2 roof sections meet at an angle). Place the preformed ridge cap over the roof’s peak and secure as the manufacturer directs. Every subsequent vertical panel will be attached to this ridge.
-
2
Lay each panel lengthwise from ridge to eave and tuck neatly into the ridge vent. Use clips or fasteners to attach the panels to the underlying sheathing. Each panel will cover the clips of the panel beneath it.
-
-
3
Using your crimping tool, crimp together the raised edges of the panel ends together. This creates the raised seam appearance and provides a watertight seal to your finished roof.
-
4
Paint your finished raised seam metal roof!
-
1
Tips & Warnings
Follow your manufacturer's guidelines carefully, as some products differ may slightly in installation.
If you are working on a sunny day, remember that metal quickly becomes very hot to handle. Use common sense precautions.
As with any roofing job, have at least one friend assist you. In case of a fall or other emergency, their presence can be invaluable.
Make sure that one of you has access to a cell phone that can be used to summon help.
Resources
- Photo Credit www.bobvila.com
More Like This
Comments
-
GVHinesman
Jan 20, 2010
Often, there are several approaches that can be used for such projects. Professional contractors and reliable online sources contacted for this information would disagree with you. If you would like to take the matter up with them directly, contact information can be provided.
-
lazlo03
Dec 17, 2009
You have to be kidding me right????? These directions are not just wrong they are horribly misleading. I mean really----- no one should ever follow anything that was written. This should be removed and done by someone that knows something.
