How to Paint a Vinyl Fence

Maybe your vinyl fence is looking a little worn. Or, perhaps you want to change the color of it. Painting a vinyl fence is possible but you need to buy the correct kind of primer and paint. Not just any paint will adhere to the vinyl surface. Follow these steps to paint a vinyl fence.

Difficulty: Easy

Instructions

Things You'll Need:

• Primer
• Exterior paint
• Paint sprayer
• Vinyl fence
• Drop cloth
• Gloves
• Hose
• Drying rags

1. Spray down the surface of the vinyl fence with the hose. Dry it with the rag or allow it to dry in the sun.

2. Get a primer with the ability to stick to most surfaces. You'll need to buy an epoxy-based paint. That's the only kind that will adhere to the vinyl.

3. Look for a brand that protects against mold and mildew. Glidden is a good one to try. It's relatively inexpensive and you can tint it.

4. Lay down a drop cloth, if you're concerned about getting paint on your lawn or garden. A cloth or plastic one should work fine.

5. Use a paint sprayer for the primer and paint. It allows the paint to go on evenly without dripping and clumps. It's much faster than using a roller or paint brush.

6. Keep the paint sprayer moving consistently, using a back and forth motion.

7. Seal your vinyl fence with a high quality sealer. It will extend the life of your fence. Choose different shines for your fence. You can go with a satin finish or high gloss finish depending on the look you're going for.

Tips & Warnings

• Make sure the directions on the primer can say it adheres to vinyl. A lot of people paint their vinyl shutters, so use a primer that works for shutters.
• Make needed touch ups with a roller or brush.
• Paint damages the surface of the vinyl fence. Thus, it will likely negate any warranty you have on the fence.

Resources

• Information on painting a vinyl fence