How to Modify a Car's Exhaust System

Car enthusiasts will often modify a car's exhaust system in order to increase the engine performance or get the noise of the engine to achieve a specific pitch. It requires good knowledge of your car's exhaust system, but it can be completed with a minimum of fuss, provided you follow some basic guidelines.

Things You'll Need

  • Jack or hydraulic lift
  • Welding torch
  • Bolt cutters
  • Socket wrenches
Show More

Instructions

    • 1

      Raise the car up on a jack or a hydraulic lift so that you can comfortably work on the exhaust system.

    • 2

      Note the part of the exhaust system you wish to modify and the point in the line at which it is found. You may also want to note any part of the system which is fused or rusted, since these will be more difficult to remove.

    • 3

      Disconnect each part of the exhaust system, one by one, until you reach the part you want to modify. Generally, a welding torch is required, though you may be able to achieve this simply by removing the bolts that connect it. Take care not to damage any surrounding components in the process.

    • 4

      Disconnect the old exhaust part you wish to modify and replace it with the new exhaust part. Bolt it or hang it in place on the chassis, but do not tighten the bolts yet. Check that all of the components work correctly before finalizing the addition.

    • 5

      Attach the remainder of the original exhaust system to the new part, working backwards down the line until you reach the end of the exhaust system.

    • 6

      Check that each connection is in place and there are no leaks or backups.

    • 7

      Secure each connection by tightening the bolts or welding them back into place on the chassis.

    • 8

      Start the car engine and check the exhaust system for any leaks or blockage. Make sure exhaust is coming from the end of the tailpipe as it should and that the sound is modified correctly by the muffler, and locate and seal any leaks.

    • 9

      Adjust the tailpipe to make sure it is flush with the rear bumper and is not too low to the ground.

Tips & Warnings

  • It is illegal in many areas to modify a car's exhaust system in order to make it louder or expel more pollutants. Check your local laws and stay in accordance with them before you modify your car's exhaust system.

Related Searches:

Comments

You May Also Like

  • How To Modify an Exhaust

    Upgrading your car's stock exhaust system will increase the engine's horsepower while giving your car a customized sound. Modified exhaust systems incorporate...

  • How to Replace a Car Exhaust Pipe

    Whether caused by moisture, road salt or just old age, chances are you've had to replace your vehicle's exhaust pipe at least...

  • How to Modify Stock Harley Exhaust

    Modifying a stock Harley exhaust system is almost a way of life for Harley owners. They know that with a little hard...

  • How to Change a Bathroom Exhaust Fan

    Bathroom exhaust fans play an important role in circulating air and preventing moisture buildup in bathrooms. When fans fail to operate, the...

  • How to Modify a Snowmobile Exhaust

    The exhaust on a snowmobile helps the engine breathe, allowing for extra horsepower. By expelling exhaust gas the engine is able to...

  • How to Modify Stock Harley Exhausts

    While Harleys are already high-performance bikes, once you start adding aftermarket parts, you'll find new projects to make yours even better. Make...

  • How to Change an Exhaust Manifold on a Expedition

    On the Ford Expedition what connects exhaust pipes to the engine is an exhaust manifold. The manifold can be made up of...

  • How to Improve Gas Mileage With Mods

    Achieving optimum gas mileage is a major concern for a number of reasons. For example, not only does better fuel efficiency translate...

  • How to Modify the Big Dog Supertrapp Exhaust

    The SuperTrapp exhaust on many Big Dog motorcycles is a tunable exhaust. Most motorcycle exhausts use baffle tubes and chambers to modify...

  • How to Modify a CBR 1000F Exhaust

    The CBR 1000F was made from 1987 to 1997. It was a high performance sport-touring bike that was known for its quality...

  • How to Change the Exhaust on a Jeep

    Historically, the Jeep is known to have been one of the first off-road vehicles on the front lines of many wars. The...

  • How to Install a Mod Muffler

    Replacing the muffler is a cost effective solution to improving the sound of your car. Whether you want a louder and sportier...

  • About Modified Cars

    An individual with the intention to improve the performance and appearance of the vehicle, upgrades or modifies a particular car by adding...

  • The Best Way to Modify Stock Harley Mufflers

    When modifying your Harley muffler, you should consider looks, performance, price and ease of installation. Keep in mind that a successful muffler...

  • How to Modify a 2008 Yamaha V-Star Exhaust

    The best way to modify the existing exhaust system on your stock Yamaha V-Star is to cut the baffles out of the...

  • Car Modifying Tips

    Modifying your car to create a custom vehicle is a great way to stand out from the crowd. Show your personality and...

  • How to Modify a Harley Touring Muffler

    Harley-Davidsons are famous for having a wide range of customization options, allowing owners to put their unique personality into their motorcycles. The...

  • Auto Exhaust Components

    Auto Exhaust Components. While vehicle exhaust systems come in different shapes and sizes, they all serve the same purpose -- to remove...

  • How to Change an Exhaust Manifold

    The exhaust manifold mounts to the exhaust side of the cylinder head in your vehicle, connecting to the exhaust pipe (tail pipe)....

  • How to Modify a Car

    There are many reasons to modify a car. Some people do it to improve performance, to improve the comfort level or simply...

Related Ads

Featured