How to print billboards and banners

Billboard and banners as we know serves a wide purpose.It is used for advertisements of kinds of product and most especially during campaign(political or religious)

Instructions

Difficulty: Moderately Challenging

Things You’ll Need:

• materials needed for making billboards and banners are:pencil,ruler,eraser,cardboard paper ,metal sheet of 3 yards (for billboard),3 yards white cloth or any other colour for the banner inks and oil p

1. With accurate measurements, carefully draw parallel lines on the cardboard using your pencil and ruler according to how you will want your write up to appear on the banner or billboard.Taking particular note of the gap between each letters and each line for consistency sake
2. Cut out the letters from the cardboard taking proper care of sensitive letters such as A B D O P R for accuracy
3. Place the cut cardboard (stencil)on the banner material(white clothe)which must be places on a smooth flat surface like a light board.Then pin down the four corners of the cardboard together with the white clothe to the board to keep it steady.
   Now apply the colours of your choice gently on the cut spaces of the cardboard vertically downward to avoid the inks overflowing the corners
   
   The same steps are observed for making billboard except for the fact that the billboard will first undergo sand papering,followed by whitewashing and then coating with oil paint
4. after the whole process allow your work to get dry for atleast for an hour or two before putting it to use.