How to Build a Kitfox
Many people who are fascinated with aviation technology will purchase and build a Kitfox. This is not a hobby just anybody can engage in. It's expensive and requires a lot of space to build because the average Kitfox plane can weigh 1300 pounds. But it's definitely well worth the cost and space after you've built it and taken flight. Follow these steps to build a Kitfox.
Other People Are Reading
Instructions
-
-
1
Purchase a Kitfox from your local dealer. You can also purchase them online at Kitfoxaircraft.com.
-
2
Read the manual completely before attempting to build the Kitfox. There are complicated builds that require you follow the instructions step-by-step.
-
-
3
Compare all the parts against the shipping list to assure that nothing was left out. If even one piece is missing you can't build the Kitfox.
-
4
Start work from the tail of the plane as you build the Kitfox. This includes the empennage, elevator, horizontal stabilizer, access panel and trim.
-
5
Build the fuselage of the Kitfox plane. This area includes the seats, center console, control column and cockpit floorboards.
-
6
Assemble the wings. These are sometimes partially assembled for you. You will need to attach the lift struts and wings, and reinforce the spars.
-
7
Apply the fabric to the Kitfox plane. Then it is time to work on the inside of the plane including the instrument panels, seats, lighting and mounting of the GPS unit to complete the build.
-
1
Tips & Warnings
Check out Kitfox community message boards and blogs to gain valuable insight into Kitfox building and ownership issues.
