Unhooking a Refrigerator


Replacing an existing refrigerator or moving it to a new location requires some basic preparation and disconnection procedures. Proper disconnection will help reduce the possibility of damage and ensure your refrigerator is ready for transport. For best results, start the process on the day prior to moving to allow time for the interior to dry. Doing so will reduce the possibility of mold or mildew.

Things You'll Need

  • Adjustable wrench
  • Phillips and flat-head screwdrivers
  • Bucket
  • Paper towels
  • Packing tape
  • Turn the refrigerator off, and slide the refrigerator away from the wall far enough to safely disconnect the power cord from the outlet. Doing so at least 24 hours prior to moving will allow the unit to return to room temperature, making it safer to move. Hook the disconnected end of the power cord over the top of the refrigerator or safely out of the way.

  • Remove all food and wipe the interior clean with paper towels. If the unit is equipped with an ice maker, empty the ice storage bin.

  • Turn off the water supply line valve by rotating the handle in a clockwise direction as far as it will turn. Disconnect supply line from refrigerator by turning the nut in a counterclockwise direction with an adjustable wrench. Place the disconnected end of the line into a bucket to catch any excess water.

  • Secure or remove any loose shelves, drawers or interior parts. Tape or tie the refrigerator door shut for safety.

Tips & Warnings

  • On some models, the power cord may be designed to be removed by the customer for transport.
  • The water supply line valve may be located on the wall behind your refrigerator or near where it is tied into your main water line under the kitchen sink.
  • Be careful not to tip the refrigerator over.
  • Most manufacturers caution against placing a refrigerator on its back.

Related Searches


  • Photo Credit Jupiterimages/Photos.com/Getty Images
Promoted By Zergnet


Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!