How to Add a Rolling Code to My Moore-O-Matic Garage Door Opener

Save

The Moore-O-Matic garage door opener is manufactured by Linear Access Controls and can be connected to an automatic garage door opener to remotely lift or close the garage door. The receiver can be programmed to set a code when the garage door is opened with the remote, matching the remote with the receiver. The receiver then creates a new code for the next time the door is opened, making it harder for others to figure out your access code. Setting a rolling code increases overall security.

Things You'll Need

  • Garage door opener remote control
  • Hold the garage controller and stand near the opened garage door that is associated with that garage door remote.

  • Push the “Learn Code” button underneath the cover on the back of the garage door receiver.

  • Wait for the “Learn Code” light to blink slowly. Press and release the “Open” button on the garage door remote. Wait for the “Learn Code” light on the receiver to illuminate without blinking.

  • Push the garage door “Open” button again and wait for the “Learn Code” light to go off.

  • Press the garage door “Open” button one more time and wait for the garage door to close.

Tips & Warnings

  • Make sure there are fresh batteries in the garage door opener remote control if the unit does not program as expected.

Related Searches

References

  • Photo Credit David Oxberry/Digital Vision/Getty Images
Promoted By Zergnet

Comments

Resources

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!