How to Make Cheese Grater Lamps

Save

If you want a fun and funky light for your home, consider a cheese grater lamp. With some simple materials, you can make one of these conversation pieces. A cheese grater light is exactly what it sounds like -- a hanging light fixture made from an everyday, metal cheese grater. They're easy to make and sure to brighten the mood and the room.

Things You'll Need

  • Cheese grater
  • Drill
  • Drop pendant light socket with cord
  • Bulb
  • Wire cutters
  • Plug
  • Screwdriver
  • Drill a 3/8-inch hole in the center of the cheese grater's handle.

  • Tie a knot in the cord of a drop pendant light socket, 2 inches from the light socket. Feed the end of the cord through the hole and pull the cord through until the knot reaches the hole.

  • Remove 2 inches from the light cord's outer jacket at the end of the cord. Take 1/2-inch of insulation off of the ends of the exposed black and white wires. Depending on the light socket, this may already be done.

  • Loosen the screw on the electrical plug's cover then remove the cover. Slide the cover onto the light cord. Loosen the two screws on the plug and wrap the ends of the black and white wires around the screws -- one per screw. Tighten the screws.

  • Slide the plug cover over the wiring and attach it with the screw.

References

  • "Wiring 1-2-3"; The Home Depot; 2005
  • Photo Credit Hemera Technologies/PhotoObjects.net/Getty Images
Promoted By Zergnet

Comments

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!