How Does a Sandblaster Work?

Save

Gravity-Fed Sandblaster

  • All sandblasters work on roughly the same principles: finely ground silica sand is used to clean and abrade a surface, typically metal, of any rust, paint or other unwanted surface materials. This is done by means of an air-powered pressure gun that fires out the sand at high velocity to impact with the intended surface. All sandblasters use said pressurized gun, which has a ceramic barrel or interior coating to prevent the sand from eroding it over time. The exact process by which the sand is introduced to the gun differs. The first of the three types of sandblaster is the gravity-fed model. There are three basic parts to this model: an air compressor or pressurized air tank, a hand-held pressure gun with air hose and a hopper on top of the gun. The hose connects to the air tank, and the hopper is filled with silica sand. When the trigger of the gun is depressed two things happen. First, compressed air fires through the gun as long as the trigger is held down. Second, an opening at the top of the gun into which the hopper is connected opens. The air flowing through the gun and the force of gravity pulls the sand down through the gun and out the barrel.

Pressure Blaster

  • Pressure blasters are more often used by commercial organizations, as they are significantly easier to use than the other models but also cost more to use. They consist of a large canister containing silica sand under high pressure. This is a bit similar to the concept behind an aerosol can. A sandblasting gun, usually a two-handed model, is connected to the port at the top of the canister by means of a specialized hose that can withstand the abrading affects of the sand. When the trigger of the gun is pulled, both the air and sand are forced out as a single entity. This means cleanup and maintenance is practically nonexistent, but there are some drawbacks. Because the canisters are fully enclosed, the sand that they fire out cannot be collected and reused. Also when the canister is empty, it must be swapped out for another, or an entirely new one must be purchased, both at significant cost.

Siphon Sandblaster

  • A siphon sandblaster is the model you're most likely to find in any handyman's possession. It can be used to clean and strip large surfaces and is moderately cheap. It consists of three parts. It has a sandblasting gun with two separate hoses, one connected to the bottom of the handle and the other connected the underside of the barrel. It has a normal pressurized tank or air compressor. It also has a reservoir of loose sand. This takes the form of a large bucket or container of some kind. The air hose of the gun is connected to the compressor, while the other hose is connected to the underside of the separate sand reservoir. When the gun is fired, the air serves to create a suction, which pulls the sand from the reservoir up the hose and into the gun to be fired out the barrel. As a result of this system, the sand that is fired out the barrel can be collected and placed back in the reservoir to be reused again and again.

  • Photo Credit brentonfreind.com
Promoted By Zergnet

Comments

You May Also Like

  • What is Sandblasting for Teeth?

    Sandblasting for teeth is a relatively new dental procedure that can be used in place of drilling to help clean teeth and...

  • How Does Shot Blasting Work?

    Shot blasting is an environmentally friendly and cost-effective answer to preparing or renewing large sections of concrete surfaces. If you desire a...

  • How Much Does Sandblasting Cost?

    Sandblasting is the process of propelling abrasive particles at a high speed onto a surface. It is used to clean surfaces by...

  • How to Use a Sand Blaster

    Sandblasters are the quickest way to finish the dirtier parts of remodeling, like stripping paint from the surface of bricks or concrete....

  • How to Sandblast Paint

    Sandblasting paint is probably the easiest, albeit not the neatest, way of getting paint quickly off of a surface, especially if you...

  • How to Make Money Sandblasting

    Sandblasting is used to decorate glass, metal, stone and hard plastic. There are many different types of sandblasting work. Depending on the...

  • How to Do Sand Blasting

    Sandblasting has a wide variety of uses, from getting rid of paint on metal to etching glass. It works by using compressed...

  • Can I Sandblast Paint on Wood?

    When you're remodeling part of a house or piece of wooden furniture, adding a new coat of paint or a fresh finish...

  • Siphon Feed Sand Blaster Tricks

    Siphon sandblasters are the most basic type of sandblaster available. The siphon sandblasting system consists of a hose that is placed in...

  • Sand Blasting Tips

    Sand blasting is a quick and convenient way to remove unwanted material from just about any surface. A sand blaster can be...

  • Sand Blasting Procedures

    Sand blasting is a common element of concrete construction and routine building maintenance. Sand blasting can be used to etch decorative patterns...

  • Tips on Portable Sandblasting

    Portable sandblasting is one of the most fun and rewarding professional-grade tasks you can do at home. Whether you are restoring an...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!