Homemade Pond Filter Drum


There are probably as many different types of homemade pond filters as there are types of commercial pond filters. Homemade filters vary in the type of filter material used as well as in the size and containers used. Pond filters are easy to make and are usually easy to maintain. Make a pond filter from a drum and other items readily available in most stores that have a garden or pond section.


  • Pond filters sit either outside or inside a pond. Some people prefer to use both types. A submersible pump circulates water from the pond through the filter and back into the pond. Often the submersible pump, which goes in a pond, is contained in a filter. A drum filter usually sits outside a pond.


  • The most important aspect of any pond filter is the filter material, or media, used. Many people experiment with different kinds of media until they find one that works well for their specific pond filter. Types of media that have worked well include lava rock, plastic pot scrubbers, non-fiberglass furnace filters, and foam. Generally, a combination of these will keep your pond water clear and provide a bio-filter for good bacteria to grow. Good bacteria help fight disease and keep fish and plants healthy.


  • Plastic drums work well for pond filters. Plastic is usually non-toxic and will not rust. Plastic drums (55 gallons) are have either a closed or an open top. For a pond filter, use an open top so you can place the media inside the drum. An open top will also make it easier to install valves and tubing.


  • Make a hole for a valve toward the top of your drum. Attach the hose from a submersible pump to the valve. Use a sealant to fill in open areas around the valve. Install a valve toward the bottom of your drum and a hose that will go back into your pond.

    Essentially, the water from your pond goes through the top valve, down through the filter material, then out the bottom valve and hose back into the pond. The bottom hose can go directly into the pond or be connected to a fountain or waterfall.

    A good media to use in a large drum is pot scrubbers. Fill your drum three-quarters full with scrubbers, and covered the scrubbers with foam batting (used in quilting).


  • If the media in your submersible pump stays dirty most of the time and is not doing a good job of keeping the water clear, the filter may not be big enough for the pump. Add another drum by connecting a hose between the two drums. Two filters may also be needed for larger ponds (1,500 gallons and over).

    If the filter media stays clean and does not look used, and the water in the pond is still not clear, consider getting a larger submersible pump.

Related Searches


  • Photo Credit Ryan McVay/Photodisc/Getty Images
Promoted By Zergnet



You May Also Like

  • How to Grow Fish in 55-Gallon Drums

    Keeping fish has become a popular pastime. Although aquariums large and small can be purchased to contain nearly every species of fish...

  • DIY Pond Filter Media

    The materials inside a pond filter are what make the water in your water garden sparkling clear and healthy for plants and...

  • DIY Barrel Fish Farm

    As urban gardens become more common in the U.S., a barrel fish farm can be used to raise fish in an urban...

  • Which Filters Are Best for a Koi Pond?

    A koi pond filter removes or converts fish waste. Koi are sensitive fish, and water chemistry and overall water quality affects the...

  • Simple Homemade Pond Filters

    Building simple homemade pond filters can help keep costs down for your backyard water garden landscaping project. Just as effective as store-bought...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!