How to Design Drawers for a Chest of Drawers

Save
Next Video:
How to Cut Drawer Sides for a Chest of Drawers....5

Learn how to design drawers for a dresser in this free DIY woodworking video.

Part of the Video Series: How to Build a Chest of Drawers
Promoted By Zergnet

Video Transcript

In this video clip we will be designing our drawers. The sides of the drawers are going to be made out of 1/2" oak plywood and the bottoms are going to be made of 1/4" oak plywood. With the drawer slides that we will be installing the directions require us to have a 1/2" clearance on each side of the drawer. When I measure my opening for my drawer I get 28" if I subtract that 1/2" clearance from each side my drawer width is now going to be 27". When I designed my chest of drawers I designed it so that the top 3 drawers have the same height and the bottom 2 drawers have a different height. The height of my top 3 drawers are 8" typically you need to have 1/2" clearance on top of the drawer so you can fit it in with it being on a drawer slide. However since clothes are going in this drawer and typically people stack there clothes a little bit higher that the top of the drawer, I'm actually going to leave a 1" clearance. With that being said the height of my top 3 drawers are going to be 7". For my bottom 2 drawers I have a height of 10" I'm going to subtract my 1/2" clearance and that's going to give me a height of 9" for my bottom 2 drawers. For the depth of all of my drawers I'm going ahead and measure the depth of my chest of drawers which is 20", now on the back of my chest of drawers I'm going to have a sheet of 1/4" plywood that I'm going to rabbit in. So I have to subtract a 1/4" from my depth, so the maximum depth that my drawers can be is 19 3/4". Typically you want to leave a little bit of room behind your drawer, now since the maximum depth can be 19 3/4" I'm going ahead and make my drawer to 19" as my depth. So my final measurements for my top 3 drawers will be 7" high, 27" wide, 19" deep. For my bottom 2 drawers my width is going to be 27 which is the same as the top the depth is going to be 19, which is the same as the top 3 drawers. However my height is going to be 9" since that opening is a little bit bigger.

Related Searches

M
Is DIY in your DNA? Become part of our maker community.