Install Lamps on a Portable Work Light

Video Transcript

"Hi, this is Jon on behalf of Expert Village. In this video clip we'll be installing the lamps. First off we need to remove the center screw which is located in the back of the lamp head cover. This will allow the lamp head grill to swing down. At this point you want to make sure you have your lamp taken out and a clean piece of cloth. You'll notice that written on the inside of the lamp head it says "engage lamp this side first". Now what that means is when we get ready to put our lamp into our lamp head we are going to put that side in first. Then we are going to position the other side in so I'm going to position my right side in first then my left side. Lastly you want to give the bulb just a real gently tug to make sure that it's in there. After that we can close the lamp head and retighten that center screw."