Your hardwood stairs are pretty to look at, and everyone compliments them when they come over to your house. Unfortunately, you just slipped down them and sprained your ankle while trying to make a grand entrance. Stairs made of finished wood and laminates can be slippery and can mean painful falls for young and old alike. Making your stairs less slippery is possible without having to refinish them.
Carpeting can add traction to your stairs. Fortunately, you don't have to recarpet the whole staircase. Some houseware companies sell miniature versions of braided rugs with a nonslip backing that you can place on each step. Carpet runners are also an attractive way to add tread to the carpeting. A piece of carpet in a style you like is cut and hemmed to run the full length of your staircase and is then installed down the center. You can still see the gorgeous wood underneath but don't have the same slipping problems.
Stair treads are made of different materials. Upscale treads, like those offered by Plow and Hearth, are stain-resistant treads with an embossed scroll pattern that makes them look attractive. Backed with a heavy-duty rubber backing, they lay right on the stairs, won't slip and slide and can be hosed off when dirty. Some treads are made of rubber or other materials and are glued or stapled on to the staircase.
Wooden stairs with a thick coat of varnish on them can be sanded down to make them less slippery. Take a piece of fine-grit sandpaper and rough up the center, most-traveled area of the step. If the varnish is too tough for that, a harsher grit might be needed. Damaging the stair and removing all of the finish is usually not necessary, just enough to create a bit of friction.
Different types of strips are available to place at the edge of stairs. For outside steps, stainless steel mesh treads are effective, especially in rain. They are fastened to each step with stainless steel screws. Other strips are available, including self-sticking strips that have a sandpaper-like texture on the up-side. Those with a flair for carpentry have had success securing small strips of wood about 1/4-inch wide by 12 inches long in groups of three or four to prevent slipping. These are attractive and can match the stain and finish of the stairs but do take some getting used to when walking both up and down the stairs.
- Photo Credit Jupiterimages/Photos.com/Getty Images
Different Types of Staircases
A staircase can become the center of attention in an entrance way or room. Some are used as a focal point of...
How to Fix Outdoor Stairs That are Slippery
Slippery stairs are extremely dangerous. They can cause horrible falls and spills that can break bones and cause bruises. The key to...
How to Fix Slippery Wood Stairs
Elegant wood stairs can add an element of character to your home but can also represent a hazard. They often become slippery,...
How to Install Carpet Runners On Stairs
Installing carpet runners on stairs will make your home seem more elegant and make the trip up and down your stairs more...
How to Put Grip Tape On Slippery Stairs
Under normal circumstances, climbing or descending stairs is uneventful, but a lack of proper friction between the foot and step can send...
How to Make Wood Floors Less Slippery
Slippery wood floors are a nuisance and a danger; fix the problem quickly and cheaply or by going the extensive, expensive route.
How to Make Hardwood Steps Not Slippery
Slippery hardwood steps can be treacherous, especially when walking in socks. Eliminating the problem all depends on the type of look you're...
What Can I Do About Slippery Tile Stairs?
Ceramic tile is among the most widely used flooring options throughout the home. Its resistance to wear and tear makes it ideal...