Instructions for Using the Endless Embroidery Hoop

Save

The endless embroidery hoop is an amazing tool for home embroiderers. Not only will it allow you to embroider endless borders, but also endless designs. All top-of-the-line embroidery machines offer an endless hoop, and if the manufacturer of your machine does not, there are generic endless hoops that may work. The endless hoop is easy to use, but it may take you a couple tries to master it. Use your hoop template and print out the design before attempting to stitch it for better results.

Things You'll Need

  • Embroidery machine
  • Endless hoop compatible with your machine
  • Hoop template
  • Stabilizer
  • Fabric
  • Fabric pen
  • Embroidery thread
  • Thread snips
  • Choose your design, load it to your computer and print it out. Lay your fabric flat and smooth out any wrinkles. Place your printed design on the fabric where you want the design. Lay your hoop template on top of the printed design. The printed picture is used only to help place center design marks on the fabric for the embroidery process.

  • Poke a hole through the center of your design using your fabric pen. Gently mark the center of your design on your fabric using the fabric pen through the paper. Remove the printed paper but leave the hoop template. Draw a large plus sign following your hoop template's center lines, and remove the template.This will help center your embroidery design once you are ready to stitch the design out.

  • Lift the top portion of the hoop up using the lever. Refer to the hoop's manual if you need assistance. Place a piece of embroidery stabilizer on the bottom hoop. Embroidery stabilizer stabilizes the material so the design will stitch out correctly.

  • Place the fabric over the stabilizer and close the top portion of the hoop using the lever. The fabric should be centered in the hoop, and the markings should be inside the hoop, since you will be embroidering that area.

  • Insert the hoop into the hoop area on your embroidery machine, and stitch as normal. When you are ready to move the fabric, lift the top hoop using the lever and reposition the fabric using the markings as a guide. Start stitching again. Continue repositioning the fabric until your design is complete.

References

  • Pfaff; Pfaff Endless Hoop Manual
Promoted By Zergnet

Comments

Resources

You May Also Like

  • How to Use an Embroidery Machine

    The popularity and availability of home embroidery machines has opened a whole venue of crafting possibilities. Rather than hand-stitching names and images...

  • How to Do Machine Embroidery on Leather

    Leather inlaid with embroidery looks stylish and rich, but can be tricky to work with. Finishes on leather vary because of the...

  • DIY Embroidery Hoop

    Embroidery hoops, usually made of wood, metal or plastic, are handy for keeping fabric taut while applying fancy stitchery, whether it's by...

  • How to Use Pfaff Grand Hoops

    A grand hoop allows you to embroider designs for large projects. The hoop is easy to set up and use, and is...

  • How to Design Your Own Embroidery

    Embroidery is a beautiful and nearly lost art. Embroidery adds a touch of elegance, of times long gone and it makes anything...

Related Searches

Read Article

How to Make a Mid-Century Modern Inspired Fruit Basket

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!