How to Polish and Varnish a Table After Sanding


Made from a combination of linseed oil and shellac resin, varnish creates a high-gloss finish. Varnish comes in long-, medium- and short-oil mixtures; terms that refer to the amount of oil mixed with the resin. Long- and medium-oil varnish works on floors, walls and exterior areas. For a table, use short-oil varnish for the highest quality finish and best gloss. Apply a layer of varnish to a table after sanding it to protect the surface. Once the varnish dries, polish the table to create a smooth finish.

Things You'll Need

  • Cloth
  • Glass or ceramic bowl
  • 2-inch fine-bristled brush
  • 4-inch fine-bristled brush
  • 350-grit sandpaper
  • 600-grit sandpaper
  • Soft rag
  • Apply varnish in a well-ventilated area where the temperature is between 70 and 80 degrees Fahrenheit. Place a drop cloth on the floor to protect the floor's surface.

  • Wipe the table clean with a dry rag to remove dust particles, sawdust and dirt. Pour the varnish into a glass or pottery container that has a wide-mouth opening. Use a 4- to 8-inch container; this size is large enough to fit a brush in but not so big you end up pouring out too much varnish.

  • Select a brush that has fine bristles. A 2-inch brush is ideal for small areas like trim, table legs and in the corners. For a larger area, like the tabletop, use a 4-inch brush.

  • Dip the brush bristles into the varnish. Dip the brush straight down so that the varnish covers the top two-thirds of the bristles. Brush the varnish onto the table in short strokes starting at one end and working towards the other. Overlap the strokes to create even coverage.

  • Dip the brush into the varnish every few strokes to keep it coated in varnish. Avoid applying too much as it will start to run and pool on the surface. Aim for a light, even coat.

  • Brush the entire surface once the varnish is applied to the whole area. Use the same brush and cover the tabletop with long even stokes to even out the varnish application. Allow the varnish to dry for four to six weeks.

  • Sand the varnished table surface lightly using a 350-grit sandpaper. Soak the sandpaper in water before sanding the varnished surface. Run the sandpaper over the table to even out the surface and knock down any dust particles.

  • Apply the second coat of varnish using the same short overlapping strokes followed by the long coverage strokes. Allow the table to dry for another four to six weeks. Sand the varnish with 600-grit sandpaper before applying the final coat. A good coat of varnish takes two to four coats.

  • Polish the table when the last coat of varnish dries completely. Use a soft cloth that is free of zippers, snaps or Velcro. Apply furniture polish to the cloth as directed on the label. Some polishes come in aerosol cans that can be spread directly onto the furniture surface.

  • Rub the furniture polish into the tables surface using circular strokes. Wipe off the excess using a second clean, soft rag.

Related Searches


  • Photo Credit Jupiterimages/ Images
Promoted By Zergnet


You May Also Like

  • How to Choose a Wood Varnish

    Varnish protects wood from scratches and stains with a polyurethane coating. It's typically used over stains but can be used alone on...

  • How to Varnish a Table

    The surface of a table can sustain a lot of wear and tear. Liquid can permanently stain the area and sharp items...

  • How to Sandpaper a Varnished Table

    Varnish is a strong, durable finishing agent, but it can loose luster and chip. Sandpaper will remove varnish. The grit of the...

  • How to Sand Table Tops

    Tables can be the center of a family or home. It is where you gather to eat, where you entertain guests and...

  • How to Dry Tacky Varnish

    Varnishing a wood product requires a well-ventilated area to keep air circulating throughout the space, not only for proper breathing, but also...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!