Portable air conditioners allow you to cool off rooms that might not otherwise be reached by ventilation. These units stand in the center or off to one side of the room where they pull the humidity out of the air and cool it. Portable air conditioners use an exhaust hose to blow out hot air and water vapor generated by the unit. When hooking up a portable air conditioner, you will need to route the exhaust hose to the nearest window.
Things You'll Need
- Portable air conditioner
- Exhaust hose
- Exhaust panel
- Damp rag
Locate the portable air conditioner near a suitable window that will hold the exhaust vent. Do not plug in the air conditioner yet.
Open the window that will hold the air conditioner vent.
Use a brush and damp cloth to clear out any dust, leaves or other debris that might have collected on the windowsill. This will help ensure a good seal for the exhaust panel.
Insert the exhaust panel into the window. There may be a channel or ridge that locks into place at the bottom of the window. Extend the exhaust panel to the full width of the window.
Continue holding the exhaust panel in place with one hand. With your other hand, pull down the window until it locks in place over the top of the exhaust panel.
Secure the exhaust panel into place, if desired, by screwing it into the window frame.
Connect one end of the exhaust hose to the inlet on the exhaust panel. Secure in place with a hose clamp. Connect the other end of the exhaust hose to the outlet on the air conditioner. Secure with a clamp.
How to Install a Window Air Conditioner
The mercury is rising and the humidity is making it feel even hotter. It's time to install that air conditioner! If central...
How to Set Up a Portable Air Conditioner That Works
Portable air conditioners save you money while still keeping a commonly used room in your home cool. If you decide to cool...