How to Refinish Wood in Black Lacquer


Black lacquer has a deep and rich color that natural wood lacks. The lacquer is a type of liquid coating applied to the surface of the wood that makes it look dark black. The color is also shiny and glossy, catching the light and making the piece look more high-end. While black lacquer furniture is often expensive, you can achieve the same look yourself using black lacquer. Refinish any type of wood with the process, including furniture and cabinets.

Things You'll Need

  • Warm, soapy water
  • Soft cloths
  • Fine grit sandpaper
  • Wood putty
  • Putty knife
  • Black primer
  • Paintbrush
  • Spray black lacquer paint
  • Clear, high-gloss spray paint
  • Clean the wood surface with warm, soapy water. Coat a soft cloth with the soapy mixture and wipe all areas of the wood. Dry the surface carefully with a soft cloth.

  • Rub fine grit sandpaper across the surface of the wood, removing any paint or stain adhering to the surface of the wood. Make sure that the wood has a smooth and even surface, as any imperfections will show through. Wipe away any excess wood dust. If you leave any traces of the stain or original color behind, the primer should cover it up.

  • Check the wood carefully, looking for any signs of damage, such as cracking, chips or holes. Apply a small amount of wood putty to those areas. Hold the putty knife at an angle to the wood and wipe it across the surface, pulling off any wood putty stuck to the top of the wood. Let dry. Sand down the wood until the putty sits even with the surrounding wood. Remember that any imperfections will show through both the primer and the paint, and the finish will look rough or bumpy.

  • Paint the black primer on the surface of the wood, using the paintbrush. Let dry.

  • Sand lightly and wipe with a damp cloth to remove sanding dust. Let dry.

  • Apply the spray black lacquer, shaking the can according to manufacturer's directions. Apply one thin coat, let it dry, sand lightly and repeat once more, or as needed until you've achieved the glossy black look you want.

  • Apply two even coats of a clear, high-gloss spray sealant like polyurethane to protect the wood and create a hard surface finish.

Tips & Warnings

  • Dark gray primer also works well with the lacquer, but doesn't look as dark or heavy as the black.


  • Photo Credit Hemera Technologies/ Images
Promoted By Zergnet


You May Also Like

  • How to Refinish Lacquer Furniture

    How to Refinish Black Lacquer. How to Refinish Lacquer. How to Polish Lacquer Furniture. How to Apply Lacquer. How to Paint Lacquered...

  • How to Refinish Walnut Wood

    Suppose that your walnut furniture has been scratched or stained or otherwise damaged and you want to restore it. To do this...

  • How to Refinish Dark Spots on Wood

    How to Refinish Dark Spots on Wood. Dark spots on wood are a common problem. ... How to Remove Black Spots From...

  • How to Achieve a Black Lacquer Finish

    Black lacquer is a beautiful, ... Lacquer is a protective wood finish. Black lacquer is commonly used on pianos and other fine...

  • How to Paint Black Lacquer

    If you've grown tired of, or would like to update a piece of black lacquer furniture, consider painting it. Black lacquer can...

  • How to Refinish Lacquered Cabinets

    Lacquer provides a durable, resilient finish over kitchen cabinets. As a protective type of coating in the kitchen, lacquer forms a barrier...

  • How to Paint Wood to a High Gloss

    How to Use High-Gloss Paint; How to Paint Doors With Black Gloss; Print this article; Things You'll Need. 150-grit sandpaper; ... How...

  • How to Black Lacquer a Table

    A black lacquer coffee table, side table or dining table can lend an air of formality and drama to any modern room....

Related Searches

Read Article

Make an Ikea Lack Table Look Expensive With This Cheap Hack

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!