How to Dye an Area Rug

Save

Area rugs give your room instant texture and color and are more affordable and flexible than wall-to-wall carpeting. If you update your décor, however, your perfectly good area rug may no longer work with your new interior scheme. If you are working with an area rug that is originally fairly light in color and has little to no pattern, dye your rug a darker color that works better with your new décor. This type of project works best with smaller area rugs that are light or pastel colored originally.

Things You'll Need

  • Wooden stirring stick
  • Dye
  • Rubber gloves
  • Identify the type of fiber your rug is made out of. This will dictate the type of dye and dyeing process you use, and it is usually located on the rug tag. Purchase enough dye for the weight and fiber content of your area rug. Consult the dye manufacturer's website and the dye directions to ensure that you have plenty of dye beforehand.

  • Fill a large sink with hot water so that your area rug can float freely in the water with plenty of room to spare. Just prior to dyeing, add several large potfuls of boiling water, which will give your rug a much better color result. If you are using a powder dye, predissolve the dye in 2 cups of boiling water. Add the amount of liquid or predissolved dye required for your rug. Stir the dye bath with a wooden stirring stick to evenly spread the dye.

  • Completely submerge your rug in clean, hot water. Your bathtub or shower works well for this purpose. Ensure that all fibers of the carpet are soaking wet with hot water.

  • Transfer your area rug to the sink containing the dye bath. Lower it carefully into the water while wearing rubber gloves to protect your hands. Leave the rug in the dye bath for up to 30 minutes, stirring the water constantly. Take the rug out when it has reached the desired color. If it isn't dark enough, make another dye bath with one and a half times the dye you used in this bath and soak for up to another 30 minutes until your color is achieved.

  • Unplug the sink drain and allow the dye bath water to run out. Rinse the area rug thoroughly with warm water to remove all excess dye and continue rinsing until the water runs clear. Transfer the rug to your washing machine and wash with gentle laundry detergent and warm water.

  • Clean your sink with bleach cleanser to remove excess dye. Air dry your area rug. Do not use until completely dry.

References

  • Photo Credit Jupiterimages/Comstock/Getty Images
Promoted By Zergnet

Comments

You May Also Like

  • How to Use Coffee to Dye a Carpet

    Many people know about tea dyeing: using strong tea to dye paper and fabric, giving them an aged-looking patina. Fewer people know...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!