Many older homes use radiators to heat the house. You may have updated the heating system in your home and now have unsightly radiators that you no longer use. Removing them from the home is one option, but cast iron is heavy. Instead of removing them, you can build decorative radiator covers. These covers can double as an extra shelf or place to put decorations or potted plants, especially if the radiators sit in front of a sunny window. This is a good project for novice woodworkers.
Things You'll Need
- Measuring tape
- Miter saw
- Wood glue
- Staple gun with staples
- Table saw
- Finishing nails
- 10-inch by 8-foot length of pine
- Plywood (optional)
- Paint or stain
Take some measurements of your radiators, making sure to measure each one individually as they vary in size. Measure the height, width and depth of each radiator and add 3 inches to each measurement.
Cut your pieces of molding for the frames for each side of the radiator cover. Cut two pieces for each length and two pieces for each height using the miter saw. (You should have pieces for two sides and the front but not the back of the radiator cover.)
Lay out the frame for each side on your work surface with the front of the molding pieces facing down. Line up the mitered corners. Place a bead of glue between the two pieces and then use a staple gun to hold the pieces in place.
Use the table saw to cut out the pieces of wainscoting to fit the molding frames, leaving a 1/4-inch allowance all the way around.
Attach the wainscoting to the molding frame using the staple gun.
Stand up the three pieces of the radiator cover and line up the corners. Place a bead of glue between the two pieces and then attach them together using the finishing nails and the hammer.
Measure the top of the radiator from side to side and front to back and add 2 inches for overlap. Cut the pine to this measurement. Use the optional plywood if your front to back measurement is more than 10 inches.
Place the top shelf piece on top of the sides of the radiator cover. Align the back piece flush, but allow the sides and the front to hang over a little bit to create a decorative lip. Use the finishing nails to attach the top to the sides of the cover.
Paint or stain your radiator covers as desired.
Tips & Warnings
- If you still use your radiators but want to cover them up, use metal screening at the front and sides of the radiator cover to allow the warmth to flow.
- If you have several radiators that you want to build covers for and are not all the same size, work on one at a time to eliminate any confusion.
- Photo Credit Martin Poole/Lifesize/Getty Images
Wainscoting, once a necessity in drafty houses, has become more decorative than functional. It still serves a function, though a knowledge of...
Types of Home Heating Radiators
Though central heating has become the norm in North America, the U.S. Department of Energy says approximately [10 percent of American homes](http://energy.gov/science-innovation/innovation/commercialization/national-clean-energy-business-plan-competition-0)...
How to Install Wainscoting
Wainscoting, (wooden panels covering the lower section of a wall and topped with a chair rail), has traditionally been associated with expensive...
How to Install Beadboard
Beadboard paneling can add a sense of rustic charm to any room and at the same time cover up many problems such...
How to Build a Radiator Cover
This easy DIY tutorial shows you how to make a radiator cover to cover those unsightly or unused radiators you might have...
How to Find Reasonably Priced Radiator Covers
A radiator cover can offer a stylish center-point to a room, but also succeeds in channeling heat from the radiator toward the...
How to Build Wooden Baseboard Radiator Covers
Radiators along the baseboard are a common blight on even the most attractive homes. Just as with runner board heaters, radiators look...
How to Hang Curtains Over a Radiator
Positioning a radiator underneath a window counteracts drafts in the winter, warming cool air before it enters your home. But covering the...