Damaged, faded or stained headrests can get new life with coverings you can make yourself. In addition to the custom options available to you if you make your own headrests, removable covers make cleaning and maintenance easy. Choose a fabric that can be washed and is thick enough to cover the existing texture of the headrest.
Things You'll Need
- Measuring tape
- Fabric pencil
- Sewing gauge
- Straight pins
- Coordinating fabric
- Sewing machine
- Hook-and-loop tape
Remove the headrest from the vehicle seat. Measure the thickness of the headrest on the sides, top and bottom. Divide each of these individual numbers in half, and then add a half-inch for the seam allowance. If your headrest is 3-inches thick on the sides, 4-inches thick on the bottom and 2-inches thick on the top, the measurements you need to note are: 2 inches, 2-1/2 inches and 1-1/2 inches, respectively.
Trace the outline of the headrest onto your muslin with a fabric pencil. Adjust the sewing gauge by sliding the movable marker to the measurement you noted. Place the edge of the sewing gauge marked with the "1" on the bottom edge of the side you traced on the muslin. Use a fabric pencil to mark 2 inches out from the line you traced, and continue marking 2 inches away from the trace line for the rest of the headrest pattern.
Cut out a template out of the muslin for your headrest. Pin the template to a folded piece of the fabric you chose for the headrest cover. Cut out the template and, because you folded the fabric, you will have two even pieces of fabric after cutting.
Hem the bottom edge of each piece using a half-inch hem.
Place the two fabric pieces together with the right sides facing each other. Pin the pieces to keep them from shifting during sewing. Sew around the side and top edges of the cover, using a half-inch seam allowance.
Turn the cover right-side out and fit it over your headrest. Mark the fabric where the posts are at the bottom of the headrest. Remove the cover from the headrest.
Measure the distance from the outside edge of the cover to the first metal headrest post and cut a piece of a hook-and-loop tape, such as Velcro, to this measurement. Measure the distance from the first post to the second post and cut another piece of hook-and-loop tape to this measurement. Cut a third piece of hook-and-loop tape to the distance from the second post to the left outside edge of the cover.
Sew the hook side of the hook-and-loop tape pieces to the back piece of the cover then sew the loop side to the front side of the cover at the bottom edge.
Place the cover onto your headrest and fasten the hook-and-loop tape at the bottom edge.
How to Make a Duvet Cover
New duvet covers can be expensive, but they are relatively easy to make yourself. All that's required to make one are a...
How to Sew a Car Seat Cover
The car can truly be an extension of your personality. One way to individualize your car is to sew your own car...
How to Make a Futon Cover
You have a perfectly good futon that you would like to use as an extra couch and bed. The only problem is...
How to Install Headrest DVD Players
If you take your car on long family road trips, having headrest DVD players for backseat movie viewing for the kids will...
How to Create Your Own Seat Cover
Making your own seat covers allows you to customize your car and protect your upholstery. For a new car, prevent the dings,...
How to Make Your Own CD Cover Online for Free
You can make your own CD cover online a couple of ways. Two websites allow you to do so for free. Big...
Instructions on Making Car Seatcovers
Your seat cover design and precise sewing instructions will vary depending on how your car seat is shaped, how large it is...