Zenith Tension Shower Rod Instructions


Installing a tension shower rod is a simple way to add privacy to any shower area without screwing into walls or potentially damaging tile. Because a tension rod works through the pressure of springs to hold it in place, you can safely use a tension rod on any wall surface. A Zenith tension shower rod is especially effortless to use because it’s available in a variety of finishes and can be found at most home improvement stores.

Things You'll Need

  • Tape measure
  • Zenith tension rod
  • Level
  • Curtain rings
  • Shower curtain and liner
  • Measure the width of your shower from one wall to the other. Purchase a Zenith tension rod that will fit the width needed for your shower's size. An average Zenith rod will fit a shower anywhere from 42 to 72 inches long, but there are rods available in smaller sizes.

  • Hold one end of the tension rod while twisting the other in a clockwise direction to lengthen it to fit in between your walls above the side of your bathtub. Position one end of the Zenith rod where you want it above the tub and hold the other end of the rod at a downward angle.

  • Give the rod a clockwise twist to lengthen it by a quarter- to a half-turn. Raise the lowered end and use some light pressure to gently squeeze the rod into place. Adjust both ends as needed to make sure the rod is as level as possible. Give the rod an extra quarter-turn to hold it securely.

  • Add shower curtains and a liner to the rod using the curtain rings of your choice. If the curtains touch the floor, adjust the rod farther up the wall and recheck that it is level so the curtains run no closer than an inch above the floor.

  • Check the rod by tugging on the curtains. The rod should be straight and snug between the walls, but it should not bow out. Adjust the folds of the curtain as desired to leave it open or closed, with an even amount of ruffle throughout for the most attractive appearance.

Tips & Warnings

  • Be sure to select curtains and a rod that go together and match the decor you want for your bathroom. Zenith rods can come in a variety of metal finishes as well as plain painted white, so try to select one that matches the other hardware in the bathroom.
  • Don’t force the tension rod into the shower space, or you may buckle and bend the metal. If the rod appears to be under too much pressure, simply twist the rod counterclockwise to loosen it a quarter-turn at a time.

Related Searches


  • "Beautiful Home on a Budget"; Emilie Barnes; 1998
  • Photo Credit Shower image by Semfamily from Fotolia.com
Promoted By Zergnet



You May Also Like

  • How to Hang a Shower Curtain Rod

    Shower curtains provide convenience and protection, and every household should have one in the shower. They help keep water from flooding your...

  • Instructions for a Spring Tension Curtain Rod

    Spring tension curtain rods are one of the easiest ways to hang curtains. They do not require any tools or hardware. They...

  • Tension Rod Directions

    According to the University of Florida Extension web site, curtains help save energy. Tension rods offer a means of hanging a curtain...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!