How to Build a Carving Bench

Save

A carving bench provides a solid surface to work on wood carving projects. In addition to a solid surface, it also frees up both hands. If you have been carving without a bench, you will notice a difference in the speed and accuracy of your projects. Carving bench designs vary from large and stationary to small and portable. Portable benches are more versatile and you have the advantage of carving everywhere you travel. It is a smaller version of a stationary bench. For this reason a portable bench is a good choice for your first project.

Things You'll Need

  • 2 1-by-6-by-6-inch hardwood boards
  • 1 1-by-6-by-14-inch hardwood board
  • 1 2-by-9-by-24-inch hardwood board
  • 1 1-by-9-by-24-inch hardwood board
  • 1 box of 2 1/2-inch wood screws
  • Screw gun
  • 3/4-inch drill bit
  • Drill
  • 4 1-by-6-inch hardwood dowels
  • Draw knife
  • 1/8-inch drill bit

How to Build a Carving Bench

  • Place the 1-by-6-by-6-inch boards parallel to each other on a work surface approximately 14 inches apart. These are the ends of the bench trestle. Place the 1-by-6-by-14-inch board in the center of the ends and perpendicular to them. This is the trestle center. Use a screw gun to put three 2 1/2-inch screws through the outside of the ends into each end of the trestle center. This is the trestle assembly.

  • Place the 2-by-9-by-24-inch board on top of the trestle assembly. Center and fasten it with 2 1/2-inch screws. This is the top of the carving bench.

  • Flip the bench over. Place the 1-by-9-by-24-inch board on top of the trestle. Fasten this bottom to the trestle. Turn the bench upright.

  • Drill 3/4-inch holes approximately one inch in from the edges of the top. Space them every two inches. These are for the bench dowel dogs, tapered dowels that hold the carving in place.

  • Use a draw knife to cut a tapered end on one end of each 1-by-6-inch dowel. The tapered end of the dowel should slide mid-way into the holes on the table. These bench dogs can hold work in place. Drill a 1/8-inch hole through each end of the bench bottom approximately two inches in from each end. These can be used to screw the portable bench to a larger work surface.

Tips & Warnings

  • Adjust the size of the bench to accommodate the size of the wood carvings that you typically make.
  • Wear eye protection when working with wood.

References

  • Photo Credit woodwork image by Daniel Wiedemann from Fotolia.com
Promoted By Zergnet

Comments

Resources

You May Also Like

  • How to Make a Wood Storage Bench

    Making a wood storage bench is a easy and fun do-it-yourself project. There are plenty of options to choose from when making...

  • How to Sharpen a Draw Knife

    A drawknife is a shaping tool used when making hand-split shingles and other flat-surface items. A sharp drawknife is a smooth-cutting wonder....

  • How to Build a Small Bench

    Benches are ideal first projects. They require only a few basic tools that most do-it-yourselfers have on hand. While benches are simple...

  • Work Benches for Wood Carving

    Learn how to arrange work benches for your woodcarving project in this free woodworking tips video from our expert wood carver.

Related Searches

Check It Out

DIY Wood Transfer Christmas Ornaments

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!