Things You'll Need:
- Vacuum cleaner Old leg of pantyhose Rubber band Suede shoe brush Canned compressed air
-
Step 1
Cut an old leg off of some sheer pantyhose and pull the toe end over the end of your vacuum hose snugly and secure tightly with a rubber band. Run the vacuum on low power and slowly draw the hose over the surface of the painting. If you have a very powerful vacuum or your painting is in weakened condition, do not touch the hose to the surface, just hover over it loosening and picking up dust and debris.
-
Step 2
Brush with suede or nubuck shoe grooming brush to loosen caked-on dirt or debris. Be very careful with the wire brush side and make short strokes over the unpainted areas of the painting. Flip the brush over to the soft nubby grooming side to smooth the nap and around the edges of the paint.
-
Step 3
Blow dust and debris off of the painting with a pressurized container of compressed air--the kind typically used to clean computer keyboards. You can pick up a can for a few dollars, and it should cover a medium-size painting. Hold the canned air straw nozzle and spray in the plane of the face of the painting, blowing dust out of the velvet nap. Tap the painting gently on the ground periodically to assist the dust or embedded debris in falling free.
