How to Install Large Vinyl Decals
No matter what your likes and interests are, you can probably find a large vinyl decal that suits you. Decals come in a variety of subjects that include sports teams, racing, cars, trucks, Disney characters, animals and religion. Hanging these colorful decorations on a wall in your home isn't difficult. But it does take some time and a little skill to do it right. Does this Spark an idea?
Things You'll Need
- A de-greasing cleaner
- Soft, lint-free cloth
- Liquid dish-washing detergent
- Spray bottle
- Masking tape
- Squeegee
Instructions
-
-
1
Clean the area of the wall where you want to place the vinyl decal. The area must be completely free of dust, dirt, grease and grime for the decal to adhere properly. Use a de-greasing cleaner, such as Formula 409, and a soft, lint-free cloth. Rinse thoroughly with water, and allow the area to dry completely.
-
2
Put a few drops of dish-washing detergent in a spray bottle. Then, fill the bottle with water and shake it gently to mix the ingredients.
-
-
3
Tear off some small pieces of the masking tape. Tape the top edge of the large vinyl decal to the place on the wall where you want it to be. Make sure this where you want to install it.
-
4
Hold the decal up with one hand while you spray the wall behind it until it's wet. Then, carefully peel the backing off the large vinyl decal. Put the decal into place, making sure you install it flat so it doesn't wrinkle.
-
5
Squeegee across the decal starting from the center to remove excess liquid and any air bubbles. Be careful not to stretch or tear the vinyl.
-
6
Allow the large vinyl decal to air-dry for about 15 minutes. Then, carefully remove the masking tape and the protective layer that's on top of the decal.
-
1
Tips & Warnings
If the large vinyl decal you want to install is very big, you may want to enlist the help of a friend. The ideal temperature range of the room you're going to install the decal in should be between 45 and 90 degrees Fahrenheit. Remove small air bubbles in the large vinyl decal after a day or two. Simply poke them with a needle and push them down.
Don't attempt to install a large vinyl decal on a wall that's just been painted. Wait at least 72 hours. If the room is very humid -- above 90 percent -- you may experience problems when you install a large vinyl decal.
